Setting The Bottom Margin (Botmrg); Setting The Left Margin (Leftmrg) - TallyGenicom LA650 User Manual

User guide
Setting the bottom margin
(Botmrg)
Topmrg Botmrg
Back Next
1 2 3 4
Botmrg= 70
Set < > Exit
1 2 3 4

Setting the left margin (Leftmrg)

Leftmrg
Back Next
1 2 3 4
Leftmrg= 0 /10 "
Set < > Exit
1 2 3 4
The bottom margin option gives you the possibility to set the bottom
margin with the number of the line (numbered from the top paper
edge) where the printing actually stops for a given page.
Press the Botmrg key (2).
Online
Setup
Setting options: Line 1 to Formlength
*
Default setting:
Online
Setup
The setting of this Option depends on the setting of both the
vertical pitch and the form length options. For details refer to
Setting line spacing (LPI)
(page 92). The Values range from the value for top margin (see
Setting the top margin (Topmrg)
length.
Do not set Topmrg eqal or higher than Botmrg.
STOP
Confirm the setting by pressing the Set (1) key. Change to the next
parameter with the Next key (4).
The left margin option is defined by the number of the columns
(numbered from the left paper edge) where the printing actually
starts.
Press the Leftmrg key (2).
Online
Setup
Setting options: 0 to 30/10"
*
Default setting:
Online
Setup
Confirm the setting by pressing the Set (1) key. Change to the next
parameter group with the Next key (4).
Formlength
(page 48) and
on page 73) to the value for form
0/10"
The Menu
Form length (Forml)
74