Specifications - Classe Audio CP-500 - V2.8 Owner's Manual

Table of Contents

Advertisement

42

Specifications

All specifi cations are accurate at the time of printing. Classé reserves the right to
adjust specifi cations without notice.
Frequency response
Distortion (THD + noise)
Maximum input voltage (single-ended)
Maximum input voltage (balanced)
Maximum output voltage (single-ended)
Maximum output voltage (balanced)
Gain range
Input Impedance (balanced)
Input Impedance (single-ended)
Output Impedance (main output)
Signal-to-noise ratio (ref. 10Vrms input)
Channel separation
Crosstalk (any input to any output)
Rated power consumption
Idle power consumption
Mains voltage
Overall dimensions
Net weight
Shipping weight
For more information, see your Classé dealer, or contact:
Classé Audio
5070 François Cusson
Lachine, Quebec
Canada H8T 1B3
Telephone +1 (514) 636-6384
FAX
+1 (514) 636-1428
Internet:
http://www.classeaudio.com
email:
cservice@classeaudio.com
Classé and the Classé logo are trademarks of Classé Audio Inc. of Lachine, Canada. All rights reserved.
i-Command™ is a trademark of Equity International, Inc. All rights reserved.
AMX® is a registered trademark of AMX Corporation of Richardson, TX. All rights reserved.
Crestron™ is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All rights reserved.
DC – 200kHz ± 0.1dB
better than -120dB @ 1kHz
determined by the needs of country for which
the unit was manufactured;
cannot be reset by dealer or user
Width: 17.5" (445mm)
Depth: 16.5" (419mm)
Height: 4.75" (121mm)
0.003%
5Vrms
10Vrms
10Vrms
20Vrms
-100dB to +14dB
200kΩ
100kΩ
100Ω
110dB
better than 110dB
30W
29W
26lbs (12kg)
33lbs (15kg)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp-500

Table of Contents