Front Panel - Classe Audio CA-M600 Owner's Manual

CA-M600

Front Panel

1 Standby button & LED indicator
The front panel Standby button will toggle the amplifier between operate,
its fully operational state, and a standby mode that leaves the amplifier off,
yet ready to respond to system commands via any of the supported control
options (e.g. IR input, DC trigger, CAN-Bus, or RS-232).
The current state of the amplifier is indicated by the LED indicator in the
Standby button. The state of this LED indicates the following:
• on (dim red)
• flashing blue (on power-up) =
• on (blue)
• flashing (after power-up)
• flashing (alternating red/blue) =
• slow flashing red
1
= standby
initialization
operate
=
AC mains voltage out of range
=
the air intake filter needs to be cleaned
protection circuit(s) engaged
=
CT-M600
11