Table of Contents
Advertisement
Quick Links
UNI-LIFT 6500 / 8000
Automotive lift date: 03/2017
Manual date: 05/2018
Operating instruction and documentation
Serial number: ..........................
Händler/ Telefon
Made in Germany
Otto Nußbaum GmbH & Co.KG // Korker Straße 24//D-77694 Kehl-Bodersweier
Tel: +49(0)7853/8990 Fax: +49(0)7853/8787
E-mail:info@nussbaum-group.de//http://www.nussbaum-group.de
Advertisement
Table of Contents
Related Manuals for Nussbaum UNI-LIFT 8000
Summarization of Contents
Foreword and Operator Responsibilities
Operator Obligations and Safety
Details operator's duties for safe lift operation and adherence to instructions.
Lift Operation Dangers and Precautions
Highlights hazards of inexpert operation and necessary safety measures.
Conditions for Safe Lift Operation
Defines the required conditions for correct and safe use of the automotive lift.
Operational and Maintenance Requirements
Organizing and Safety Requirements
Ensures instructions are accessible and safety rules are observed.
Maintenance, Faults, and Disposal
Guidelines for proper execution of maintenance and repair works.
Guarantee and Liability Terms
Specifies conditions affecting guarantee and liability for damages.
Introduction to Operating Instructions
Installation and Safety Checks
Specifies requirements for installation and safety checks by trained personnel.
Explanation of Warning Symbols
Clarifies warning symbols used for danger, caution, and important notes.
Master Document for Lift Management
Lift Manufacturer and Application
Details lift manufacturer, intended use, and operational restrictions.
Recording Construction Changes
Procedure for documenting construction changes and expert verification.
Recording Lift Relocation
Procedure for documenting lift relocation and expert verification.
Technical Specifications Overview
Technical Ratings and Performance Data
Details lift capacity, power, speed, and hydraulic specifications.
Integrated Safety Devices List
Lists and describes the safety features built into the lift.
Safety Regulations and Guidelines
Operations Instructions Overview
General instructions for safe and correct operation of the lift.
Vehicle Lifting Procedure
Steps for safely driving the vehicle onto the lift.
Vehicle Lifting Procedure Details
Control Unit Overview and Functions
Illustrates the lift's control unit and its main components.
Vehicle Lowering Procedure
Platform Equalization Procedure
Steps to equalize the height of the lift platforms.
Troubleshooting Guide Introduction
Motor Not Starting Troubleshooting
Common causes and solutions when the lift's motor does not start.
Troubleshooting: Motor and Lowering Issues
Obstacle Encountered During Lowering
Procedure for handling situations where the lift hits an obstacle.
Emergency Lowering Procedure Overview
Introduction to emergency lowering by experienced personnel.
Emergency Lowering Procedures
Emergency Lowering: Power Failure/Valve Issues
Manual lowering for power failures or defective hydraulic/pneumatic valves.
Emergency Lowering: Detailed Sequence
Step-by-step guide for performing the emergency lowering process.
Lift Inspection and Maintenance Overview
Recommended Lift Maintenance Plan
Schedule and procedures for regular lift maintenance.
Security Check Procedures
Regulations for Lift Installation
Rules and requirements for safe and proper lift installation.
Lift Initiation and Final Checks
Procedure for Changing Installation Place
Process for relocating the lift to a new installation site.
Need help?
Do you have a question about the UNI-LIFT 8000 and is the answer not in the manual?
Questions and answers