Xerox XCARD-SCAN User Manual page 79

Maintenance
3. Click on the Properties button to open the Device Settings tab for your scanner.
4. Dampen the cleaning sheet with the Isopropyl rubbing alcohol.
Try to dampen the cleaning sheet only in the area where the problem exists in the image. For example,
if the line or smudge in the image appears in the center of the scan, dampen cleaning sheet in the
center.
Only dampen one side of the cleaning sheet.
5. Click on the Clean button to start the cleaning utility.
6. Place the cleaning sheet in the scanner. Place the damp side face up.
The scanner pulls in the cleaning sheet. The scanner will move the cleaning sheet back and forth during
cleaning.
7. When cleaning is complete the scanner will eject the cleaning sheet out of the scanner. Do not
forcefully pull the sheet out, the scanner will release the sheet when it has fully exited out of the
scanner.
74
Xerox Card Scanner 200 User's Guide