Configure Before Scan - Xerox XCARD-SCAN User Manual

Configure Before Scan

You can set up the scanner so that, when you put a page in, a different scanning interface opens before the
scanning starts. To set up the scanner for this capability, you select Configure Before Scan from the scan
configuration list.
Choosing Configure Before Scan simply opens either the TWAIN or WIA scanning interface when you
insert a page. You can then use the interface to change the Resolution, Scan Mode, and other settings.
When you scan, the scanned image will still be sent as the file type and to the same Destination
Application already selected in the One Touch Properties window for that button.
The option Configure Before Scan can be used when you want to scan multiple pages and have them
appear in one file.
To set Configure Before Scan:
1. Open the One Touch Properties window.
2. Select the scan configuration Configure Before Scan.
3. Right-click on Configure Before Scan and choose an interface to use for configuring before scanning.
TWAIN—The TWAIN Interface opens for you to make changes prior to scanning. See "Scanning from
the TWAIN Interface" on page 62.
WIA—The Windows Image Acquisition (WIA) Interface opens for you to make changes prior to
scanning. See "Scanning from the Windows Image Acquisition Interface" on page 66.
4. Click OK or Apply on the One Touch Properties window.
Xerox Card Scanner 200 User's Guide
Select then right-click
on Configure Before
Scan to get the menu,
and choose the
interface to use for
scanning.
Scanning
33