Skew Detection - Xerox XCARD-SCAN User Manual

Scanning

Skew Detection

By default, the scanner is set to detect when the item being scanned is at an angle, also called skewed. It
will stop scanning and back the item out of the scanner. You can turn this feature off or on from the
hardware properties Device Settings tab for your scanner.
To open the device settings tab:
1. Right-click on the One Touch icon and choose Show Hardware from the pop-up menu.
2. The Hardware Properties dialog box opens and shows information about your Xerox Card Scanner 200.
3. Click the Properties button.
4. Click on Enable the detection of excessive document skew. Backout the document if this occurs.
5. Click on OK to save the changes and close the window.
Xerox Card Scanner 200 User's Guide 59