Xerox XCARD-SCAN User Manual page 70

2. The scanner's Device Settings options opens.
3. Click on the Calibrate button. Or, click on the Clean button if you want to clean the scanner.
4. Place the calibration page, with the text face up in the scanner. The scanner grabs the page and feeds
it slowly through the scanner during calibration.
If you are cleaning the scanner, place the cleaning sheet in the scanner with the long edge leading into
the paper feed slot. The scanner grabs the sheet and passes it back and forth during the cleaning
process.
5. When the calibration or cleaning process is finished, the scanner will exit the page from the scanner.
Remove the page after the scanner has released it.
Xerox Card Scanner 200 User's Guide
Scanning from the TWAIN Interface
65