Related Manuals for Franke 1221B-10
Summarization of Contents
SAFETY INSTRUCTIONS
General Safety Precautions
Essential safety practices for product use, keeping instructions, and disconnecting power.
Installation and Environmental Safety
Covers installation requirements, exhaust air diversion, and adequate air supply.
Usage and Child Safety
Addresses safe operation, child supervision, and hot parts.
Fire Prevention and Maintenance Safety
Highlights risks related to cleaning frequency and fire spread.
INSTRUCTIONS FOR USE
Product Overview and Features
Details about LED lighting, filters, and the EasyClean system.
Operating Functions
Explains control buttons A, B, and C functions and damper operation.
Filter Monitor Setup
Procedure to activate or deactivate the filter monitoring function.
Filter Cleaning Guide
Steps for cleaning the grease filters, including soaking and dishwasher use.
Cleaning Other Parts
Instructions for cleaning the inside of the cooker hood and the damper.
SERVICE AND WARRANTY
Troubleshooting Guide
Steps for diagnosing and resolving common product issues.
Servicing and Support
Contact information and procedures for obtaining product service.
Environmental Information
Details on raw materials, RoHS compliance, and environmental assessments.
Packaging and Recycling
Guidelines for proper disposal and recycling of the product.
ELECTRICAL INSTALLATION
Connection Requirements
Details on electrical connection for 230 V~ earthed supply.
Control Conductor (Models -12)
Information on control conductor for external units or sets.
Cable Replacement
Procedure for replacing a damaged connector cable.
INSTALLATION
Required Tools and Fasteners
Lists necessary tools like screwdriver and fasteners (screws, plugs).
Mounting Dimensions
Diagram showing dimensions for installing the cooker hood.
Mounting Height Recommendations
Specifies minimum mounting distances above gas and electric hobs.
Installation Steps Overview
Visual guide indicating the sequence and components for installation.
INJUSTERING AV LUFTFLÖDEN
Damper Adjustment
Basic ventilation is set by moving the sliding damper.
Basic Ventilation Adjustment
Procedure to adjust the damper for basic ventilation using stop device G.
Forced Ventilation Adjustment
Procedure to adjust the damper for forced ventilation using stop device F.
Ventilation Flow Diagrams
Diagrams for determining airflow based on pressure and settings.
Need help?
Do you have a question about the 1221B-10 and is the answer not in the manual?
Questions and answers