Related Manuals for Adam Equipment CCT 48
Summarization of Contents
2.0 Specifications
CCT Series Specifications
Technical specifications for the standard CCT scale models.
CCT-M Series Specifications
Technical specifications for the CCT-M trade approved scale models.
CCT-UH Series Specifications
Technical specifications for the CCT-UH high resolution scale models.
2.1 Common Specifications
General specifications applicable to all Cruiser Count (CCT) scale models.
3.0 Installation
3.1 Locating the scale
Guidelines for choosing an appropriate and accurate location for the scale.
3.2 Installation of CCT scales
Steps for correctly installing the CCT series scales.
4.0 Internal Components
4.1 Opening the scale
Instructions on how to open the scale casing to access internal parts.
4.2 Scale components
Identification and description of the various components within the scale.
9.0 Factory Parameters
Parameter Navigation and Access
Guide to accessing and navigating the factory parameter settings menu.
Data and Count Settings
Configuration options for A/D count, reset, C-Con, dot, and M-Tare parameters.
Calibration and Performance Settings
Settings for G1/G2, Filter, P-Zero, and K-zero for scale calibration and performance.
Operational Mode Settings
Settings for auto-zero tracking, capacity, count unit, dual, and linear calibration.
10.0 SERVICE INFORMATION
Details of your company
Information required from the user's company for service requests.
Details of the unit purchased
Essential unit details to be recorded for future correspondence and service.
Brief description of the problem
Guidance on providing a clear description of any issues encountered with the scale.
Need help?
Do you have a question about the CCT 48 and is the answer not in the manual?
Questions and answers