Related Manuals for Adam Equipment CCT 8UH
Summarization of Contents
Specifications
Common Specifications
Details common technical specifications such as operating temperature, power supply, and calibration.
Installation
Locating the scale
Guidance on selecting an appropriate location for the scale to ensure accuracy and optimal performance.
Installation of CCT scales
Steps for installing the CCT scale, including platform attachment and initial power-up.
Internal Components
Opening the scale
Instructions on how to open the scale casing to access internal components for maintenance.
Scale components
Identification and labeling of the main internal components of the scale for reference.
Factory Parameters
A/D COUNT
View A/D counts from the internal converter for service purposes.
Reset
Procedure to reset count values on the scale.
C-Con
Check calibration count or control setting.
Dot
Set decimal point display as comma or dot.
M-Tare
Configure the tare limit for the scale.
G1 and G2
Set specific gravity parameters related to gravitational acceleration.
Filter
Adjust filter setting for reading smoothness and presentation.
P-Zero
Set the power zero limit when turning the scale on.
K-zero
Configure the key-zero function range.
Auto/ zero tracking
Configure auto-zero function limits for returning to zero.
Capacity
Set the weighing capacity limit for the scale.
Count Unit
Select the weighing or counting unit.
Dual
Configure dual weighing interval and range settings.
Linear calibration
Refer to section 7 for linear calibration procedure.
Need help?
Do you have a question about the CCT 8UH and is the answer not in the manual?
Questions and answers