Table of Contents
Troubleshooting
Related Manuals for Meiko OR 50 H
Summarization of Contents
1 Introduction and General Information
1.1 Storage of Instructions
Guidance on storing operating instructions for easy access near the installation.
1.2 Service Technician Authorisation
MEIKO authorizes specific service partners for installation, maintenance, and repair.
1.3 Machine Description Details
Information required for queries and ordering spare parts: Type and Serial Number.
4 General Safety Information
4.1 Operator's Duty of Care
Operator responsibilities for ensuring safe operation, maintenance, and adherence to instructions.
4.2 Basic Safety Measures
Fundamental safety precautions regarding electrical hazards, moving parts, and hot water.
5 Delivery, Shipping, Installation and Assembly
5.1 Delivery Checks
Instructions for checking delivery completeness and inspecting for transit damage.
5.2 Transport, Installation and Assembly
Guidelines for safe transport, installation, and assembly, including leveling and sealing.
5.3 Operating Conditions
Requirements for the operational environment, including frost-free areas and hood clearance.
5.4 Electrical Connection Requirements
Specifications for safe electrical connections, including voltage, current, and protective measures.
5.5 Fresh Water Connection Requirements
Details on fresh water connection, air gap, pressure limits, and particle filtering.
5.6 Waste Water Connection Requirements
Guidelines for waste water connection, including drain hose and grease trap requirements.
5.7 Emergency-Off Function
Procedure for switching off the machine completely via the on-site power disconnection device.
5.8 Chemicals for Operation
Recommendations for detergents and rinse aids suitable for commercial dishwashers.
6 Initial Commissioning by Service Engineer
6.1 Commissioning Procedures
Safety checks and procedures for initial start-up by qualified personnel.
7 Washing with Dishwasher
7.1 Operating Panel Overview
Explanation of buttons, displays, and indicators on the machine's operating panel.
7.2 Preparation for Washing and Rinsing
Steps to perform before each wash operation, including hood and basket preparation.
7.3 Automatic Dosing
Details on how detergent and rinse aid are automatically dispensed into the tank.
7.4 Operation During Wash and Rinse Cycle
Guidelines for loading items into baskets and managing the wash cycle.
9 Care and Maintenance
9.1 General Care Instructions
General advice on cleaning and maintaining the appliance for reliable operation.
9.2 Refilling Detergent
Instructions for refilling the detergent container, specifying suitable detergent types.
9.3 Refilling Rinse Aid
Instructions for refilling the rinse aid container, specifying suitable rinse aid types.
9.4 Cleaning Procedures
Step-by-step guide for cleaning the machine, including wash arms and nozzles.
9.5 Stainless Steel Surface Care
Guidance on cleaning stainless steel surfaces with appropriate agents.
9.6 De-scaling Process
Procedure for removing lime scale deposits using suitable industrial dishwasher products.
10 Basic Appliance Information
10.1 General Machine Description
Overview of the machine's execution, wash principle, and general design.
10.1.3 Disinfection Machine with A0 Control
Explanation of disinfection using A0 control and temperature monitoring.
10.1.4 Disinfection Machine with Thermolabel Control
Details disinfection using Thermolabel and hygiene value assessment.
10.1.5 Water Change Programme
Description of the optional programme for changing wash water.
10.1.6 Detergent Dosing
Explanation of automatic detergent and rinse aid dispensing into the wash water.
10.2 Noise Level
Specifies the workplace noise level (LpA) of the machine.
10.3 Electrical and Hydraulic Data
References the technical sheet for electrical and hydraulic equipment data.
10.4 Dimensions and Technical Data
Refers to the technical sheet for dimensions, technical data, and installation instructions.
10.5 EC-/EU-Declaration of Conformity
Indicates where to find the EC-/EU-Declaration of Conformity.
15 Settings and On-Site Adaptation
15.1 Using the Keyboard for Programming
Guide to navigating and using the machine's keyboard for programming and parameter changes.
15.2 Code Entry
Procedure for entering access codes to unlock different user and service levels.
15.3 Service Level Functions
Accessing and managing service parameters, configuration, and machine data.
15.3.1 View/Modify Parameters
How to view and change machine parameters within the service level.
15.3.4 Configuration Level Operations
Accessing configuration parameters, inputs, and outputs within the service level.
15.3.6 Viewing Input Status
Checking the status of various machine inputs.
15.3.7 Viewing/Modifying Output Status
Checking and changing the status of machine outputs.
15.3.8 Dosing Technology Settings
Accessing and adjusting parameters related to dosing technology.
15.4 Parameter List
A comprehensive list of configurable parameters, their ranges, and factory settings.
15.5 Assignment List: Inputs/Outputs
Maps inputs and outputs to specific machine functions and conditions.
15.6 Rinse Program Parameters
Details parameters for various rinse programs, including temperature and wash times.
16 Troubleshooting
16.1 Information Reporting and Troubleshooting
Interpreting information codes and addressing common operational faults.
16.2 Error Messages and Troubleshooting
Lists error codes, their possible causes, and suggested solutions for rectification.
17 Maintenance
17.1 Safety Measures During Operation
Essential safety precautions to be observed before and during maintenance work.
17.2 Dosing Units
Information regarding the maintenance and product changes for dosing units.
17.3 Maintenance Plan
A schedule of maintenance procedures for various machine components.
18 Dismantling and Disposal
18.1 Packaging Disposal
Information on the recyclability of packaging materials used for the machine.
18.2 Old Device Disposal
Instructions for dismantling and disposing of the old appliance safely and responsibly.
Need help?
Do you have a question about the OR 50 H and is the answer not in the manual?
Questions and answers