Related Manuals for AUMA EQ 150
Summarization of Contents
Safety Instructions
Prerequisites for the Safe Handling of the Product
Essential requirements for safe handling, including legal regulations, qualified personnel, and awareness of hazards.
Range of Application
Defines the intended use of AUMA actuators for industrial valves and lists prohibited applications.
Warnings and Notes
Explains signal words (DANGER, WARNING, CAUTION, NOTICE) and safety alert symbols used in the manual.
References and Symbols
Lists and explains references and symbols used throughout the operation instructions.
Short Description
Part-turn Actuator
Definition of a part-turn actuator as per EN 15714-2/EN ISO 5211, describing its function and operation.
Product Variants
Illustrates different product variants of AUMA part-turn actuators with brief identification.
Name Plate
Type Designation
Details the components of the actuator's type designation and their meaning.
Order Number
Explains the significance of the order number for product identification and support inquiries.
Assembly
Mounting Position
Specifies allowed and disallowed mounting positions for the actuator.
Actuator: Mount to Valve
General information on mounting the actuator to the valve using a coupling.
Overview on Coupling Variants
Shows different types of couplings available for valve attachment.
Actuator (with Coupling): Mount
Step-by-step instructions for mounting the actuator to the valve shaft with a coupling.
Electrical Connection
Basic Information
Provides essential safety warnings and general information before performing electrical connections.
Electrical Connection
Instructions for opening the terminal compartment and connecting cables to the actuator.
Accessories for Electrical Connection
Information regarding accessories like cable glands and blanking plugs for electrical connections.
External Earth Connection (Option)
Details the procedure for establishing an external earth connection for equipotential compensation.
Commissioning
End Stops in Part-Turn Actuator
Explains the function of internal end stops and their adjustment for limiting the swing angle.
End Stop CLOSED: Set
Step-by-step guide to setting the CLOSED end stop position for the actuator.
End Stop OPEN: Set
Step-by-step guide to setting the OPEN end stop position for the actuator.
Dimensions of Setting Screws for Setting the End Stops
Provides critical dimensions for setting screws to prevent valve or gearbox damage.
Limit Switching: Set
Instructions for setting the limit switches to define end positions or intermediate positions.
Mechanical Position Indicator: Set
Guide to setting the mechanical position indicator to accurately reflect the valve position.
Operation and Control of Actuator
Manual Operation
Explains how to operate the actuator manually using the handwheel, especially during power failure.
Manual Valve Operation
Specific instructions and warnings for manual valve operation using the handwheel.
Motor Operation
Describes how the actuator operates via electric motor and its control via terminals.
Indications
Mechanical Position Indicator
Details how the mechanical position indicator shows valve position and operation status.
Signals (Output Signals)
Digital Outputs
Lists and describes digital output signals from the actuator, such as end position reached.
Analogue Outputs
Lists and describes analogue output signals, like position feedback signals.
Corrective Action
Faults During Operation/Commissioning
Identifies common faults during operation/commissioning and provides remedies.
Fuses Within the Actuator
Information regarding fuses used for protecting positioning electronics.
Motor Protection (Thermal Monitoring)
Explains the thermal protection mechanisms for the actuator motor.
Servicing and Maintenance
Preventive Measures for Servicing and Safe Operation
Outlines actions for safe operation, including visual inspection and checks.
Maintenance
Recommendations for grease change, seal replacement, and general maintenance intervals.
Disposal and Recycling
Guidelines for proper disposal and recycling of the actuator components.
Technical Data
Technical Data Part-Turn Actuator
Presents detailed technical specifications for part-turn actuators, including torque and operating times.
Service Conditions
Specifies mounting position, installation altitude, ambient temperature, and enclosure protection.
Further Information
Lists relevant EU Directives applicable to the part-turn actuators.
Spare Parts
Part-turn Actuator EQ 40– EQ 600
Lists spare parts and their reference numbers for part-turn actuators.
Need help?
Do you have a question about the EQ 150 and is the answer not in the manual?
Questions and answers