Table of Contents
Advertisement
Service & Maintenance Manual
Electric Reach Truck
RT16P/RT20P
WARNING
Do not use the reach truck before reading and
understanding these operating instructions.
NOTE:
• Please check the designation of your
present type at the last page of this
document as well as on the ID-plate.
• Keep it for future reference.
Scan it,
For more information
Service Hotline: 4008-836115
Version 12/2019
RTXXP-SMS-001-EN
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Noblelift RT20P
Summarization of Contents
Service & Maintenance Manual
Electric Reach Truck RT16P/RT20P
Identifies the specific electric reach truck models covered by the manual.
Correct Application
Modification Procedures
Details the process and requirements for authorized modifications to the truck.
Description of the Reach Truck
Overview of Main Components
Illustrates and names the primary parts of the reach truck for user familiarity.
Safety Information
Warning Labels
Explains the meaning and location of various safety warning labels on the truck.
Safety Devices and Controls
Describes essential safety features like emergency buttons and key switches for safe operation.
Identification Plate and General Warnings
Identification Plate Details
Specifies the information contained on the truck's identification plate for reference.
Safety Instructions and Risks
Outlines crucial safety warnings, residual risks, and mandatory operating instructions.
Commissioning, Transporting, Decommissioning
Commissioning Procedures
Details the steps for initial setup and preparation of the truck for service.
Decommissioning and Inspection
Decommissioning Process
Outlines the procedures for safely taking the truck out of service and recycling components.
Regular Inspection Checklist
Lists essential pre-operation checks to ensure the truck's safety and functionality.
Operational Instructions
Control Device Layout
Identifies and illustrates the location of all operational control devices on the truck.
Startup and Driving
Explains how to power on, start, and safely operate the truck for travel.
Steering Operation
Details the operation of the electric steering system for maneuvering the truck.
Braking and Load Curves
Covers safe braking procedures and how to interpret load capacity diagrams.
Lifting and Lowering Operations
Provides instructions for safe lifting and lowering of loads with the truck.
Mast and Fork Adjustments
Explains how to adjust the mast and forks for various operations.
Malfunctions and Emergency Procedures
Guides users on identifying malfunctions and responding to emergency situations.
Battery Management
Battery Replacement Steps
Details the safe procedure for replacing the truck's battery pack.
Battery Status Indicators
Explains how to interpret battery level indicators and warning alarms.
Battery Charging Guide
Provides instructions for safe and effective charging of the truck's battery.
Regular Maintenance
Maintenance Checklist
Lists scheduled maintenance tasks with recommended intervals for optimal performance.
Lubricating Points
Identifies key lubrication points and the required grease specifications.
Hydraulic Oil Management
Details how to check and refill hydraulic oil, including recommended types and disposal.
Electrical Diagrams
Wiring and Circuit Diagram
Presents the detailed electrical wiring and circuit diagrams for technical reference.
Symbol Descriptions
Explains the meaning of various symbols used in the electrical and hydraulic diagrams.
Diagnostics and Troubleshooting
LED Display Formats
Explains how LED indicators display different fault modes and statuses.
Fault Code Analysis
Provides detailed fault codes, causes, and conditions for diagnosing and resolving issues.
Need help?
Do you have a question about the RT20P and is the answer not in the manual?
Questions and answers