Dynamic Ip Tab; Static Ip Tab - Encore N150 User Manual

Use the MAC address when registering for the Internet service, and do not change it
unless required by your ISP. If your ISP use the MAC address of the Ethernet card as an
identifier, connect only the PC with the registered MAC address to the broadband router
and click the <Clone MAC Address> button. This will replace the current MAC address
with the already registered Ethernet card MAC
Host Name: This is optional.
MAC address: The default value is set to the WAN's physical address or MAC of the
broadband router.
If your ISP Provider has assigned a fixed public IP address for you to use, enter the
assigned IP address, Subnet Mask, Default Gateway IP address, Primary and Secondary
DNS (if available) of your ISP provider.

Dynamic IP Tab

address.

Static IP Tab

36
www.encore-usa.com