Add Pc Mac Address; Remove Pc Mac Address - Encore N150 User Manual

Enable MAC Filtering: Check to enable or disable MAC Filtering.
Deny: If you select "Deny" then all clients will be allowed to access Internet except the
clients in the list below.
Allow: If you select "Allow" then all clients will be denied to access Internet except the PCs
in the list below.
Fill in "LAN MAC Address" and <Description> of the PC that is allowed / denied to access
the Internet, and then click <Add>. If you find any typo before adding it and want to retype
again, just click <Reset> and the fields will be cleared.
If you want to remove some PC from the "MAC Filtering Table", select the PC you want to
remove in the table and then click <Delete Selected>. If you want to remove all PCs from
the table, just click the <Delete All> button. If you want to clear the selection and re-select
again, just click <Reset>.
Click <Apply> at the bottom of the screen to save the above configurations.

Add PC MAC Address

Remove PC MAC Address

59
www.encore-usa.com