Encore N150 User Manual page 94

The page allows you to save (Backup) the router's current configuration settings.
The saved backup can be restored again if needed by using the Restore Settings
selection and browse the saved backup file to restore back to the expected settings. If
restore is not an option the Restore to Factory Default may be the only way to recover the
router from damage. Using Restore to Factory Default will reset all configurations and
settings to its original factory default settings (e.g. when you first purchased the router).
Backup Settings: Use this function to save the router's current settings and
You can software reset the broadband router when system stops responding or stop
working. This is different from the hardware reset that can reset the settings by
physically pressing the button.
Back-up Tab
configuration to a file named "config.bin" to your computer. You
can also use the <Upload> button to restore the saved
configuration to the router. Alternatively, you can use the
"Restore to Factory Defaults" to force the Broadband router to
perform a power reset and restore the original factory settings.
Reset Tab
93
www.encore-usa.com