Dhcp Server; Dhcp Tab - Encore N150 User Manual

DHCP Server: This can be enabled or disabled, "Enabled" by default.
Lease time: Time leased to all IP address by the DHCP server.
Start IP: This is the first IP address in the IP pool range in which are being assigned and
leased to DHCP clients.
End IP: This is the end of the IP address pool range
Domain Name: The Domain Name for the existing or customized network.
This is where to view the current LAN clients that have assigned or leased an IP address
by the DHCP server. This screen also shows all the DHCP clients that are currently
connected to your network. The table shows the assigned or leased IP address, MAC
address and the lease expiration data for each DHCP clients. Use the <Refresh> button
to update the available information. Click the <Refresh> button to get the updated table.
You can click to put a check mark on "Enable Static DHCP IP". It is possible to add more
static DHCP IP addresses. They are listed in the table "Current Static DHCP Table". IP
address can be deleted if wanted to.
Click the <Apply> button to save the changes made to the configuration.

DHCP Server

DHCP Tab

31
www.encore-usa.com