L2Tp Settings - Encore N150 User Manual

Static IP Address – Manually configure WAN port IP address, contents of this are:
o My IP Address : This is the WAN port IP address provided by your ISP to
establish the L2TP tunnel.
o My Subnet Mask : This is the WAN port Subnet Mask provided by your ISP
to establish the L2TP tunnel.
o Gateway IP Address : This is the WAN port Gateway IP address provided by
your ISP to establish L2TP tunnel.
o DNS : This is optional. This is the WAN port DNS address provided by your
ISP to resolve the website IP Address into the domain or URL name during
establishing L2TP tunnel if you use domain name in "Service IP/Name"
instead of IP address .
Login : Enter the L2TP username assigned by your ISP Provider.
Password : Enter the L2TP password assigned by your ISP Provider.
Service IP/Name : Enter the L2TP server IP address or domain name.
MTU : What would you select would be the maximum size of packets. Keep it in
default if you are not familiar with this setting.
Type :
o Keep Connection - stay connected to the Internet
o Automatic Connection - automatically connects to the Internet when an
application needs it, and drops the connection after the designated idle time
period.
o Manual Connection – manually connect and disconnect to the internet by
the user
Idle Timeout : This function is available only if Automatic Connection is selected under
"Type". This is a maximum period of time for which the Internet connection is maintained
during inactivity. If the application is inactive for certain time designated here the internet
connection will be automatically dropped.

L2TP Settings:

41
www.encore-usa.com