Related Manuals for Raymarine REALVISION 3D RV-300
Summarization of Contents
Important information
Certified Installation
Recommends certified installation by an approved installer for enhanced warranty benefits.
Declaration of Conformity
States compliance with EMC Directive 2014/30/EU for specific transducer models.
Water ingress
Discusses the waterproof rating capacity and Ingress Protection (IP) standard.
Disclaimer
States Raymarine does not warrant error-free products or compatibility with third-party products.
Warranty registration
Advises registering the product online for full warranty benefits.
Product disposal
Instructs disposal according to WEEE Directive for electrical equipment.
IMO and SOLAS
Specifies intended use on leisure boats and workboats not covered by IMO/SOLAS regulations.
Technical accuracy
Notes information correctness at time of production but reserves right to change specifications.
Document and product information
Product documentation
Lists applicable documentation for the product, available for download from the Raymarine website.
Applicable products
Details the RV-300, RV-312(P/S), and RV-320(P/S) transducers and their compatibility.
Product overview
Describes the RV-3xx series as thru-hull mounted sonar transducers with 4 sonar channels.
Required additional components
Lists necessary system components like a compatible RealVision™ 3D sonar-capable device for full operation.
Parts supplied – RV-3xx series transducers
Details the items included in the transducer package, with descriptions and quantities.
Installation
Tools required
Lists the necessary tools for installing the RV-3xx series transducers, including a power drill and hole cutter.
Pre-installation test
Guides on how to test the transducer's operation and readings before permanent installation.
Selecting a location
Provides recommendations for choosing the optimal mounting location on the hull for best performance.
Mounting – RV-3xx plastic thru-hull
Details the step-by-step procedure for physically mounting the RV-3xx plastic thru-hull transducer onto the vessel.
Connections
General cabling guidance
Offers advice on cable types, strain relief, and shielding for optimal performance and durability.
Cable routing
Provides guidelines for routing transducer cables, emphasizing separation from other electronic signals.
Attaching the connector locking collar
Describes the process of attaching the locking collar to the transducer cable connector for a secure connection.
Making connections
Outlines the procedure for connecting the transducer cable to the sonar-capable device, including split-pair setups.
System checks and troubleshooting
RealVision™ 3D AHRS calibration
Explains the importance and process of calibrating the built-in AHRS sensor for accurate sonar imaging.
Troubleshooting
Offers solutions for common issues like scrolling image problems, no depth reading, or poor image quality.
Maintenance
Routine checks
Details periodic checks of cables and connectors to ensure proper function and safety.
Unit cleaning instructions
Provides instructions for cleaning the unit and specific care for the transducer to maintain performance.
Technical support
Raymarine product support and servicing
Lists contact information and resources for product support, warranty claims, and service repairs.
Learning resources
Points users to video tutorials, training courses, FAQs, and forums for further product knowledge.
Technical specification
Technical specification
Provides physical, environmental, sonar, and conformance specifications for the RV-3xx transducers.
Spares and accessories
Spares
Lists available spare parts for the RV-3xx series, such as the locking collar kit.
Accessories
Details available accessories like right-angled adapters and extension cables for enhancing transducer functionality.
Need help?
Do you have a question about the REALVISION 3D RV-300 and is the answer not in the manual?
Questions and answers