Related Manuals for Beckhoff KL3112
Summarization of Contents
Foreword
Notes on the Documentation
Discusses intended audience, disclaimer, and trademarks.
Safety Instructions
Covers safety regulations, exclusion of liability, personnel qualification, and instruction types.
Documentation Issue Status
Lists version changes and firmware/hardware versions.
Beckhoff Identification Code (BIC)
Explains the BIC as a unique product identifier using Data Matrix Code.
Product Overview
Two-Channel Analog Input Terminals Overview
Table comparing KL3102, KL3112, KL3122 signal voltage, current, and filter.
KL3102 Introduction and Technical Data
Introduces KL3102, its connections, LEDs, and detailed specifications.
KL3112, KL3122 Introduction and Technical Data
Introduces KL3112/KL3122, their connections, LEDs, and detailed specifications.
Basic Function Principles and Data Flow
Explains signal processing, resolution, LEDs, output formats, and data flow.
Mounting and Wiring
Installation and ESD Protection
Guidelines for ESD protection and safe installation on mounting rails.
Terminal Disassembly and Connections
Procedures for terminal removal and internal connections (K-Bus, power contacts).
Mechanical Load and Connection Systems
Instructions for enhanced mechanical load capacity and overview of connection systems.
High Density Terminals and Wiring
Introduces HD terminals, their wiring, and using bonded conductors.
Cable Connection and Shielding
Guide to connecting cables and recommendations for shielding.
Terminal Connection and LED Descriptions
Details terminal points and LED indicators for KL3102 and KL3112/KL3122.
ATEX Special Conditions and Documentation
Outlines special conditions for explosive areas and refers to further ATEX documentation.
Configuration Software KS2000
KS2000 Introduction and Configuration
Introduces KS2000 software for configuration, parameterization, and setup.
Commissioning and Sample Program Usage
Explains commissioning using KS2000 and provides guidance on sample applications.
Access from the User Program
Terminal Configuration and Bus Coupler Mapping
Covers terminal configuration, various bus coupler types, and mapping details.
Register Overview and Description
Lists and describes terminal registers for parameterization and configuration.
Control and Status Byte Usage
Explains the function and use of control and status bytes in communication.
Register Communication Examples
Demonstrates register communication via examples for reading and writing.
Appendix
Support and Service Information
Information on Beckhoff support, branch offices, and service contacts.
Need help?
Do you have a question about the KL3112 and is the answer not in the manual?
Questions and answers