Table of Contents
Advertisement
Bulletin MSG11-5715-669/UK
Operation Manual
Series D*FB / D*1FB with
Integrated Electronics
D*FB Design ³ 12
D*1FB Design ³ 10
Proportional Directional
Control Valve
Parker Hannifin
Manufacturing Germany GmbH & Co. KG
Industrial Systems Division Europe
Gutenbergstr. 38
41564 Kaarst, Germany
Tel.: (+49) 181 99 44 43 0
E-mail: valvesisde@parker.com
Copyright © 2019, Parker Hannifin Corp.
Advertisement
Table of Contents
Related Manuals for Parker D91FB
Summarization of Contents
Introduction
Ordering Codes
Details on constructing ordering codes for D*FB and D*1FB series valves.
Product Identification and Diagrams
Explains the valve's nameplate and shows block diagrams of integral electronics.
Technical Data
General, Hydraulic, and Electrical Data
Covers model, pressure, fluids, voltage, current, and connection specifications.
General Information
Scope of Supply, Compliance, and Personnel
Details delivery scope, CE marking, personnel requirements, and applicable standards.
Safety
Safety Instructions
Key safety guidelines to be followed before, during, and after installation.
Use of the Product
Usage Limitations and Risks
Details limits of use, contamination, remaining risks, and specific hazards like leaks and temperature.
Transport, Storage, and Commissioning
Instructions for safe transport, storage, and proper system commissioning.
Mounting and Electrical Connection
Guidance on valve mounting, torque values, and electrical connection details.
Pressure Fluids
Information on compatible hydraulic fluids and recommendations for use.
Electrical Interfacing
Supply Voltage and Wiring Diagrams
Specifies voltage requirements and provides diagrams for supply voltage connections.
Command Signal Input and Wiring
Explains command signal types and shows voltage/current signal wiring diagrams.
Recall Channels
Details on using recall channels for internal command presets and their priority.
ProPxD Parametrizing Software
Software Overview and Hardware Requirements
Introduction to the software, its capabilities, and necessary hardware for operation.
Parametrizing Cable and Interface
Information on the required cable and serial interface for connecting to the valve.
Program Installation and Operation
Steps for installing the software and instructions for initial startup and parameter adjustment.
Extended Functions and Parameter Ranges
Details on basic vs. expert modes, password protection, and parameter setting.
Adjustment Parameters (Basic Mode)
Lists and describes basic mode parameters for valve adjustment.
Expert Mode Parameters
Lists and describes expert mode parameters for advanced valve configuration.
Operation and Maintenance
General Operation and Safety
Guidelines for safe operation, modification restrictions, and immediate shutdown procedures.
Service and Maintenance
Procedures for periodic maintenance, checks, and fluid changes.
Hydraulic System Procedures
Instructions for air bleeding, filter maintenance, flushing, decommissioning, and disposal.
Troubleshooting
Troubleshooting Table
A table mapping malfunctions to their possible causes and corrective actions.
Product Information
Applicable Standards and Rules
References to relevant ISO, DIN, and safety regulations.
Need help?
Do you have a question about the D91FB and is the answer not in the manual?
Questions and answers