Page 2
Parker or its subsidiaries or authorized distributors. To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is respon- sible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems.
Page 7
Damages resulting from this are not the responsibility of Parker. A4. Marking, name plates - Instructions applied on the electronics, i.e. wiring diagrams and name plates, must be observed and maintained legibly.
Page 8
European Directive 2014/34/EU Serial number (PTS ID: eight-digit number, barcode) Entire name of the complete valve Hydraulical data QR-code (internal use) Hydraulic symbol Code for year and month of manufacture D1FV-D_1FB-EE 5715-728UK_EXT.indd 19.02.20 Parker Hannifin Corporation...
Wiring lenght max. [m] 50 recommended With electrical connections the protective conductor (PE W) must be connected according to the relevant regulations. √ Flow rate for different ∆p per control edge: ∆p · Nom. ∆p Nom. D1FV-D_1FB-EE 5715-728UK_EXT.indd 19.02.20 Parker Hannifin Corporation...
Page 11
Degrees of protection provided by enclosures (IP code) (IEC 60529:1989 + A1:1999 + A2:2013) BetrSichV Ordinance on industrial safety and health TRBS 2153:2009 Technical rules for operating safety Avoiding ignition hazards as a result of electrostatic charges D1FV-D_1FB-EE 5715-728UK_EXT.indd 19.02.20 Parker Hannifin Corporation...