Advertisement
Advertisement
Table of Contents
Related Manuals for Eaton PanelMate Power Pro
Summarization of Contents
Installation
Unpacking
Guide to unpacking and inspecting equipment for damage and completeness.
Parts Checklist
Lists components included in the packing carton's parts kit.
Mounting
Details proper mounting procedures, orientation, and enclosure considerations.
Safety Considerations
Outlines critical safety warnings for hazardous locations and component substitution.
Connections
Connect DC Power
Explains the 24VDC power connection requirements and polarity protection.
Connection to a Personal Computer
Describes how to upload/download configurations using the unit's serial port.
Connection to the Fault Relay
Details wiring options and function of the fault relay for alarms and system status.
Connection to the Audio Output
Instructions for connecting an external 8 Ohm speaker for audio feedback.
Connection to the Security Keyswitch
Explains the purpose of the keyswitch connection for external security applications.
Connection to Serial Ports
Details usage of Serial Port 1 and 2 for printers, PCs, or PLC communications.
Serial Port Termination
Explains serial port termination switch settings for RS232, DH485, and RS422.
Tests & Adjustments
PanelMate Diagnostic Tests
Describes internal diagnostic checks and the Offline Mode Menu options.
Execute Diagnostics
Details performing a series of tests like date/time, display, and system status.
Display System Configuration Information
Shows how to view the unit's current configuration and operational status.
Enter Run Mode
Explains how to operate the unit and communicate with the PLC or Host.
Enter Serial Transfer Mode
Guides on entering serial transfer mode for data upload/download.
Enter Network Transfer Mode
Details using network mode for remote system information access.
Calibrate Touchscreen
Instructions for performing the touchscreen calibration routine.
Touchscreen Information
PanelMate Operation
Explains the basic function of replacing hard-wired operator devices.
Touchscreen Cleaning
Provides steps to access and use the cleaning mode utility safely.
Touchscreen Calibration
Details the process for calibrating the touchscreen in Offline and Run modes.
Specifications
Environmental and Electrical Specifications
Lists operating temperature, humidity, vibration, shock, and altitude ranges.
Immunity and Emission Standards
Details ESD, radiated, conducted, surge, and transient immunity levels.
Power and Current Ratings
Specifies voltage, power consumption, and current draw for the unit.
Communication and Weight Specifications
Outlines serial port configuration options and unit weight.
Support Services
Technical Support Contact Information
Provides phone numbers, fax, website, and email for technical support.
Cutler-Hammer Company Address
Lists the physical address and contact details for Cutler-Hammer.
Cutout Template
Torque Limits for Studs
Specifies torque values for #10-32 nuts during installation.
Cutout Dimensions and Notes
Provides the panel cutout template with dimensions and important notes.
Need help?
Do you have a question about the PanelMate Power Pro and is the answer not in the manual?
Questions and answers