Regulatory Compliance Statements - ASCOM d81 Messenger Quick Reference Manual

Regulatory compliance statements

Regulatory compliance statements (EU/EFTA only)
This equipment is intended to be used in the whole EU &
EFTA.
This equipment is in compliance with the essential
requirements and other relevant provisions of R&TTE Direc-
tive 1999/5/EC. The Declaration of Conformity may be
consulted at:https://www.ascom-ws.com/doc/
The handset is marked with the label
Exposure to radio frequency signals
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This device
complies with FCC SAR limit of 1.6 W/kg. The maximum SAR
value measured when used at the ear is 0.0.13 W/kg. The
handset has also been tested when worn on the body using
belt clip, maximum measured SAR value in this configuration
is 0.016 W/kg. This device must not be co-located or
operating in conjunction with any other antenna or
transmitter.
Use of non-Ascom approved accessories may violate the FCC
RF exposure guidelines and should be avoided.
Modifications
Changes or modifications to the equipment not expressly
approved by the party responsible for compliance could void
the user's authority to operate the equipment.
Bluetooth Qualified Design ID
Bluetooth QD ID: B016451
Environmental requirements
DECT Handset:
• Only use the handset in temperatures between -10 ºC to
+55 ºC (32 ºF to +131 ºF).
• Avoid exposing the handset for direct sunlight or close to
other heat sources.
• Do not expose the handset to open flame.
• Keep the handset away from excessive heat and moisture.
16