Related Manuals for Sartorius Midrics 2
Summarization of Contents
Intended Use
Purpose and Features of Midrics Indicators
Describes the intended use and key features of Midrics indicators.
Warning and Safety Information
General Safety Precautions
Essential safety rules to follow before and during equipment use.
Installation and Electrical Safety
Guidelines for safe installation and electrical connections.
Environmental and IP Protection
Notes on IP65 rating and environmental conditions for operation.
Use in Legal Metrology
Requirements for using the indicator in legal metrology applications.
General View of the Device
Display and Keypad Layout
Overview of the device's front panel display and keys.
Rear View and Connections
Details of the device's rear panel connectors and switches.
Start-up Procedures
Unpacking and Package Contents
Steps for unpacking and checking the device contents.
Installation Guidelines
Recommendations for choosing a suitable installation location.
Device Startup and Acclimatization
Procedures for starting the device and acclimatizing it to temperature.
Connecting the Weighing Platform
Platform Connection Procedure
Step-by-step guide for connecting the weighing platform cable.
Analog/Digital Converter (ADC) Configuration
ADC Purpose and Setup Information
Explains the purpose and prerequisites for ADC configuration.
Configuration Options and Menu Items
Details on standard/verifiable configuration, accuracy class, and ranges.
Scale and Verification Scale Intervals
Defines scale interval 'd' and verification scale interval 'e'.
Maximum Capacity and Weight Units
Setting maximum capacity and selecting available weighing units.
Service Menu Operations
Purpose and Access to Service Menu
Explains the purpose and how to access the service menu.
Service Mode Activation
Activating the Service Mode
Step-by-step instructions to activate the service mode.
Configuring the A/D Converter
Accessing and Initializing ADC Configuration
Steps to open the switch, activate service mode, and select ADC config.
Standard vs. Verifiable Configuration
Choosing between standard and verifiable configuration modes.
Saving ADC Configuration Data
Procedure for saving the completed ADC configuration.
A/D Converter Configuration Examples
Standard Configuration Examples
Examples for configuring standard single and multi-interval scales.
A/D Converter Configuration Examples
Verifiable Configuration Examples
Examples for configuring verifiable single and multi-interval scales.
Key Function Allocation
Purpose and Allocation of Key ) - > 2 sec
Explains the purpose and function assignment for the key.
Geographical Data Entry
Purpose and Setup Information
Explains why and how to enter geographical data.
Procedure for Entering Geographical Data
Step-by-step guide for entering location data for calibration.
Calibration and Linearization Weights
Purpose and Setup Information
Explains the purpose and prerequisites for entering calibration weights.
Procedure for Entering Weights
Steps to enter external calibration and linearization weights.
External Linearization Process
Setup Information and Procedure
Prerequisites and step-by-step guide for performing external linearization.
Calibration and Adjustment Procedures
Purpose and Features
Explains the purpose and available features of calibration/adjustment.
Example of External Calibration
A practical example of performing external calibration.
Legal Metrology Configuration and Preload Management
Legal Metrology Configuration
How to configure the device for legal metrology.
Setting or Clearing the Preload
Procedures for setting or clearing the preload function.
Preparation for Calibration
Steps to prepare the device for calibration.
Serial Number Entry
Entering the Weighing Platform Serial Number
Steps to enter the weighing platform's serial number.
Operating Design Overview
Keys and Their Functions
Describes the function of the device's keys.
Input Methods and Display Elements
Details on keypad input, labeled keys, and display elements.
Data Saving in Weighing Mode
How application parameters are saved and retained.
Operating Menu Navigation
Menu Navigation and Input Procedures
How to open, navigate, and input data in the operating menu.
Error Messages and Information
Information on error messages, their causes, and remedies.
Data Output and Backup Options
How to output data via printer and save settings with backup.
Configuration Settings
Language Selection
Steps to select the display language for the device.
Password Management
Entering or Changing the Password
How to set, change, or delete the device password.
Operating Menu Overview
Menu Structure and Functions
Overview of the operating menu structure and available functions.
Application Programs Overview
Summary of Available Applications
Lists available application programs like Basic Weighing, Counting, etc.
Application Parameters - Neutral Measurement
Neutral Measurement Configuration
Parameters for the Neutral Measurement application.
Application Parameters - Averaging & Checkweighing
Averaging (Animal Weighing) Settings
Parameters for the Averaging application.
Checkweighing Parameters
Parameters for the Checkweighing application.
Application Parameters - Classification & Weighing in Percent
Classification Settings
Parameters for the Classification application.
Weighing in Percent Settings
Parameters for the Weighing in Percent application.
Application Parameters - Totalizing & Net-total Formulation
Totalizing Parameters
Parameters for the Totalizing application.
Net-total Formulation Parameters
Parameters for the Net-total Formulation application.
Device Parameter Configuration
Ambient Conditions and Application Filter
Adjusting to ambient conditions and application filter settings.
Stability, Taring, and Auto Zero Settings
Configuring stability range, symbol delay, taring, and auto zero functions.
Weight Units and Display Accuracy
Selecting appropriate weight units and display accuracy.
Calibration and Adjustment Configuration
Calibration, Adjustment, and Sequence Settings
Configuring calibration, adjustment, and related sequences.
Zero-Setting, Tare, and External Calibration
Settings for zero-range, taring, and external calibration.
Calibration Weight Unit and Entry
Selecting units and entering calibration weights.
Weight Unit and Display Accuracy Settings
Selecting weight units and display accuracy.
Restore WP1 Factory Settings
Restoring factory settings for the WP1 numeric menu.
Interface Port Configuration
COM1 Interface Port Settings
Detailed configuration for the COM1 interface, including protocol, parity, etc.
Interface Port Configuration (Continued)
Printer Configuration
Settings for various printer models and types.
Interface Port Configuration (Continued)
Universal Interface and Memory Settings
Configuring universal printer interface and memory settings.
Optional Interface Configuration
UniCOM Interface Port 2 Settings
Configuration for UniCOM port 2, including protocol, Ethernet, and mode settings.
Optional Interface Configuration (Continued)
Printer and Universal Interface Settings
Printer and universal interface configurations for optional ports.
Analog Output and Verifiable Memory Settings
Configuring analog data output and verifiable memory.
Control Inputs and Outputs Configuration
External Control Inputs Configuration
Settings for configuring various external control inputs.
External Control Outputs Configuration
Settings for configuring various external control outputs.
Printout Configuration
Header and Interface Printout Settings
Configuring header lines and printout settings for COM1/UniCOM interfaces.
Printout Options and Formats
Setting ISO/GMP compliance, date/time, stability printouts, and FlexPrint.
Operation Settings
Key Lock and Display Settings
Configuring key lock options and display lighting/shutoff.
Timer Mode and Geographical Data Display
Setting timer mode for shutoff and display of geographical data.
Restore Factory Settings
Restoring factory settings for the operating menu.
Operation - Basic Weighing
Basic Weighing Functionality
Core weighing function, auto-taring, minimum load, and auto printing.
Device Operation Settings
Configuring device parameters like keys, display, auto-shutoff, and timer mode.
Calibration and Adjustment Procedures
Purpose and Features
Explains the purpose and available features of calibration/adjustment.
Legal Metrology Configuration
How to configure the device for legal metrology.
Setting or Clearing the Preload
Procedures for setting or clearing the preload function.
Preparation for Calibration
Steps to prepare the device for calibration.
Data ID Codes Management
Features and Setup for ID Codes
How to assign names and values to ID codes.
Factory Settings for ID Codes
Default names and values for ID codes.
Application Programs Overview
Summary of Available Applications
Lists available application programs like Counting, Neutral Measurement, etc.
Counting Application
Counting Features and Configuration
Features and setup parameters for the Counting application.
Calculation and Keypad Input Methods
Methods for calculating reference weight and keypad input.
Tare Function and Preparation
Explanation of the tare function and preparation steps.
Neutral Measurement Application
Neutral Measurement Features
Features of the Neutral Measurement application.
Configuration Parameters
Setup parameters for Neutral Measurement, including minimum load and resolution.
Reference Value Calculation and Saving
How reference values are calculated, saved, and displayed.
Preparation and Tare Function
Steps to prepare and use the tare function.
Averaging (Animal Weighing) Application
Averaging Features and Configuration
Features and setup parameters for the Averaging application.
Starting Averaging Routines
Methods for starting the averaging process manually or automatically.
Application Parameters and Minimum Load
Parameters for averaging, including minimum load and activity settings.
Display and Tare Function
How average values are displayed and the tare function.
Weighing in Percent Application
Weighing in Percent Features
Features of the Weighing in Percent application.
Configuration and Calculation Methods
Setup parameters and ways to calculate reference weight.
Minimum Load and Display Options
Minimum load settings and how results are displayed.
Tare Function and Preparation
Explanation of the tare function and preparation steps.
Checkweighing Application
Checkweighing Features and Setup
Features and setup parameters for Checkweighing.
Preparation and Minimum Load Settings
Steps for preparation and minimum load configuration.
Display Modes and Digital I/O Interface
Display modes and configuration of digital inputs/outputs.
Classification Application
Classification Features and Configuration
Features and setup parameters for Classification.
Preparation and Minimum Load Settings
Steps for preparation and minimum load configuration.
Digital I/O Interface and Display Options
Using the digital I/O interface and display options.
Totalizing Application
Totalizing Features and Value Saving
Features of Totalizing, including automatic value saving.
Manual Value Addition and Memory Clearing
How to manually add values and clear the totalizing memory.
Minimum Load and Data Record/Printout
Minimum load settings and data record/printout configuration.
Tare Function and Preparation
Explanation of the tare function and preparation steps.
Net-total Formulation Application
Net-total Formulation Features
Features of the Net-total Formulation application.
Component Weighing and Display Modes
Weighing multiple components and switching display modes.
Minimum Load and Tare Function
Minimum load settings and explanation of the tare function.
Preparation and Calculation Methods
Steps to prepare and methods for calculating reference weight.
Printout Configuration
Printout Content and Generation
Configuring printout content, item deletion, and generation methods.
Interface-Specific Printout Settings
Settings for COM1 and optional UniCOM interfaces.
ISO/GMP Printout and Factory Settings
Configuring ISO/GMP printouts and restoring factory settings.
Data Interface as Printer Port
Header and Identifier Name Configuration
Configuring header lines and identifier names for printouts.
Date/Time and Separating Block Settings
Configuring date/time format and separating block.
Initialization Data Block Configuration
Configuring the initialization data block for printouts.
Sample Printouts
Application-Specific Sample Printouts
Sample printouts for Weighing, Counting, Neutral Measurement, Weighing in Percent, Checkweighing.
Sample Printouts (Continued)
Classification, Animal Weighing, and Totalizing Samples
Sample printouts for Classification, Animal Weighing, and Totalizing applications.
Component and Individual Printout Examples
Examples of component and individual printouts.
Data Interface Options
COM1 Data Interface Options
Details on RS-232, SBI/XBPI protocol, and clock options for COM1.
UniCOM Data Interface Options
Options for UniCOM, including RS-232, RS-422, RS-485, analog, and digital I/O.
Error Messages
Troubleshooting Error Codes
List of error codes, their causes, and recommended remedies.
Care and Maintenance
Service, Repairs, and Cleaning
Guidelines for service, repairs, cleaning, and safety precautions.
Disposal and Recycling Information
Information on proper disposal and recycling of the equipment.
Technical Specifications Overview
Device Specifications and Ratings
Details on readability, accuracy, housing, power supply, and emissions.
Accessories
Printer and Printer Accessories
Various printers and accessories for them.
Accessories (Continued)
Interface Modules and Adapters
Accessories for COM1, UniCOM interfaces, and adapters.
Electrical, Miscellaneous, Software, and Power Supply Accessories
Other accessories including electrical, software, and power supply items.
Accessories (Continued)
Cables and Mechanical Accessories
Various cables and mechanical mounting accessories.
Declarations of Conformity
EC Directives and Standards Compliance
Information on compliance with EC directives and European standards.
Installation Service and Legal Metrology Verification
Details on installation services and verification requirements.
Appendix: General Password
Accessing and Setting the General Password
Steps to access and set the general and service passwords.
Appendix: Guide to Verification
Verification Compatibility and Program Usage
Information on verifying instruments and using the provided program.
Legal Notices and Copyright
Legal information, copyright, and terms of use.
Need help?
Do you have a question about the Midrics 2 and is the answer not in the manual?
Questions and answers