Puretec SOL30-E3 User Manual

Puretec SOL30-E3 User Manual

Volumetric water softening appliance

Advertisement

User Guide
SOL-E3 Series
ATS5200.103
Licence No. WM 74593
Australian Certification
Volumetric Water Softening Appliance
Services
For correct operation & installation it is essential to observe these instructions.
JAN2019

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SOL30-E3 and is the answer not in the manual?

Questions and answers

Summarization of Contents

Before Installation
Installation Requirements and Precautions
Covers professional installation, water testing, correct placement, planning, and essential warnings for safe setup.
Exploded Diagram and Parts
Component Identification
Diagram showing all parts of the water softener and their identification.
Installation Procedure
Unpacking, Water Testing, and Positioning
Steps for unpacking equipment, ensuring water has been tested, and correctly positioning the softener.
Plumbing and Connection Steps
Guidance on connecting the softener to main plumbing, drain, and overflow lines.
Initial Setup and Programming Entry
Connecting to power and proceeding to the initial programming section for the unit.
System Programming
Operation, Display, and Time Setting
Explains system displays, how to set the time of day, and general operation.
Configuration Settings and Regeneration
Details for setting hardness levels, day override, and regeneration times.
Regeneration Modes and Power Loss
Information on automatic/manual regeneration modes and how the system handles power loss.
System Start-Up
Initial Operation and Regeneration
Steps for initial start-up, including filling the brine tank and a manual regeneration, plus capacity overview.
Salt Supply and Maintenance
Salt Replenishment and Tank Cleaning
Guidance on replenishing salt, recommended salt types, and yearly brine tank cleaning.
Media Replacement
Information on ordering replacement media and customer service contact details.
Bypass Valve Operation
Valve Modes and Functionality
Illustrations and explanations of normal, bypass, diagnostic, and shut-off modes of the bypass valve.
Troubleshooting Guide
Reset Procedures and Basic Issues
Covers the 'Dry' Reset Procedure and troubleshooting for display, time, and regeneration problems.
Advanced Troubleshooting and Error Codes
Addresses regeneration failures, water quality, regenerant issues, drain line problems, and error codes.
Product Warranty
Warranty Terms and Regional Details
Provides overall warranty terms and specific details for Australia and New Zealand.

Table of Contents