Related Manuals for Puretec Basic SIB Series
Summary of Contents for Puretec Basic SIB Series
- Page 1 User Guide SIB / TW Series Drinking Water Filter Systems For correct operation & installation, it is essential to observe these instructions. APR2020...
- Page 2 Introduction Puretec Customer Service Thank you for purchasing a Puretec Basic undersink drinking water system. Your system is a proven performer manufactured from only quality materials and components and will give years of ‘spring fresh’ water free of impurities if maintained properly.
- Page 3 Isolate water supply and cut copper pipe ready to install the ball valve. Connect the ball valve to the multivalve (if included, PL models) with a piece of white tubing (see figures 1 & 3). Flush with a small amount of water to remove any debris. Puretec Basic SIB / TW Series | Drinking Water Filter Systems...
- Page 4 Replacement Cartridges: See Cartridge Installation • This system requires regular replacement of the filter cartridge to maintain proper operation. Varying chlorine, sediment, or organic substance levels may affect replacement frequency. • Be sure to change the filter cartridge at least every 6 - 12 months which ever occurs first; or whenever you detect a change in taste, odour, or decrease in flow. Caution: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Installation & Operation Manual Copyright © Puretec Pty Ltd 2020...
- Page 5 Flexible Tubing Pressure Limiting Multivalve (if included, PL models) Housing Assembly (Twin Pictured) Mounting Bracket Tube, Nut and Ferrule Tube Insert Faucet Lock Nut and Washer Black Plastic Washer Black Rubber Washer Escutcheon Plate High Loop Faucet Puretec Basic SIB / TW Series | Drinking Water Filter Systems...
- Page 6 For metal tube remove burrs and chamfer tube end to prevent O-Ring seal being damaged. Tube is secured in position. DISCONNECTION PROCEDURE Push collet against body and slide tube out of fitting. Installation & Operation Manual Copyright © Puretec Pty Ltd 2020...
- Page 7 Applicable to all above, is that the warranties need to be approved by Puretec to ensure product was not incorrectly used, installed or claimed. False and incorrect claims will be pursued at Puretec’s discretion, including chargeable inspection and labour costs incurred.
Need help?
Do you have a question about the Basic SIB Series and is the answer not in the manual?
Questions and answers