Table of Contents
Advertisement
Quick Links
P
RO
PD6210 Analog Input &
PD6210: 0-20 mA, 4-20 mA, 0-5 V, 1-5 V, 10 V Inputs
PD6310: Pulse, Open Collector, NPN, PNP, TTL, Switch
Contact, Sine Wave (Coil), Square Wave Inputs
NEMA 4X, IP65 Front
Start/Pause/Stop, Change Batch with Front Panel Buttons
Single or Multi-Stage Batch Control (Up to 8 Relays)
Automatic Overrun Correction
Rate in Units per Second, Minute, Hour, or Day
Automatic or Manual Batch Control
Low or High Flow Alarms
9 Digit Grand Total with Overflow Feature
Count Up or Down with Each Batch
Free MeterView
and Programming
PRECISION DIGITAL CORPORATION
89 October Hill Road • Holliston MA 01746 USA
Tel (800) 343-1001 • Fax (508) 655-8990
V
Batch Controllers
U
PD6310 Pulse Input
®
Pro Software for Operation, Monitoring,
www.predig.com
Advertisement
Table of Contents
Troubleshooting
Related Manuals for PRECISION DIGITAL ProVu PD6310
Summarization of Contents
SPECIFICATIONS
General Specifications
Covers display characteristics, front panel rating, programming methods, and noise filter settings.
Input and Output Specifications
Details PD6210 analog and PD6310 pulse inputs, relay specs, and 4-20mA output.
Communication and Expansion Module Specs
Covers Modbus RTU serial communications and the PDA1044 expansion module.
COMPLIANCE INFORMATION
Safety Standards
Lists UL/c-UL listing, front panel rating, and low voltage directive compliance.
Electromagnetic Compatibility (EMC)
Details emissions requirements and immunity standards for the device.
INSTALLATION
Unpacking and Panel Mounting
Instructions for unboxing, inspecting, and preparing the panel cutout for mounting.
Power and Transmitter Voltage Configuration
Guides on configuring 12/24 VDC power and selecting transmitter excitation voltage.
Controller Connections
Details on connecting input signals, relays, power, and communication interfaces.
BASIC OPERATION AND PROGRAMMING
Front Panel Interface Overview
Explains the function of front panel buttons, status LEDs, and programming navigation.
Controller Operation Modes
Describes general operation, batch control, and default settings for start, pause, and stop functions.
Batch Control Example and Features
Illustrates a two-stage batch control setup and additional operational features.
Display Functions and Messages
Menu Navigation and Value Setting
Explains the main menu structure, navigation, and how to set numeric values.
Controller Configuration Menus
Covers setup for input, scaling, totalizer, relays, and passwords.
Relay Operation Settings
Guides on setting relay assignments, actions, alarms, fail-safe, and time delays.
Relay Operation Details
Overview of Relay Functions
Describes the dual roles of relays as batch control or alarm indicators.
Fail-Safe Relay Behavior
Explains how relays operate in fail-safe mode based on selection and power failure.
Alarm LED Indicators and Modes
Details front panel LEDs for alarms and explains automatic reset and pump alternation.
Interlock Relay Configuration
Outlines how to set up relays as interlocks using digital inputs and switches.
Alarm and Sampling Operation Diagrams
Provides graphical illustrations of high/low alarm, fail-safe, and sampling relay operations.
ADVANCED OPERATION AND PROGRAMMING
Accessing Advanced Features Menu
Instructions for entering the advanced features menu by holding the Menu button.
Signal Conditioning and Output Programming
Details on signal conditioning, linearization, low-flow cutoff, and analog output setup.
Controller Copy Functionality
Explains how to clone settings between controllers using a special cable.
TROUBLESHOOTING
Diagnostics and Software Information
Describes how to access the diagnostics menu and determine the controller's software version.
Factory Default Reset Procedure
Step-by-step guide to restore the controller to its original factory default settings.
Default Parameter Settings
A table listing default settings for major parameters, with space for user settings.
Troubleshooting Common Issues
Lists common symptoms and provides check/action steps for resolving problems.
Need help?
Do you have a question about the ProVu PD6310 and is the answer not in the manual?
Questions and answers