Table of Contents
Advertisement
Installation Instructions
Roof Curbs for Performance Climate Changer™
Air Handlers
Model CSAA and PSCA
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing
of heating, ventilating, and air-conditioning equipment can be hazardous and requires specific knowledge and
training. Improperly installed, adjusted or altered equipment by an unqualified person could result in death or
serious injury. When working on the equipment, observe all precautions in the literature and on the tags,
stickers, and labels that are attached to the equipment.
May 2018
SAFETY WARNING
CLCH-SVN05C-EN
X-39641204010
Advertisement
Table of Contents
Related Manuals for Trane PSCA
Summarization of Contents
Introduction and Safety Warnings
Warnings, Cautions, and Notices
Defines safety advisories like WARNING, CAUTION, and NOTICE for hazard identification.
Proper Field Wiring and Grounding Required!
Emphasizes qualified personnel for wiring to prevent electrocution and fire hazards.
Personal Protective Equipment (PPE) Required!
Mandates wearing appropriate PPE to protect against electrical, mechanical, and chemical hazards.
Important Environmental Concerns
Discusses the impact of refrigerants on the ozone layer and responsible handling.
Important Responsible Refrigerant Practices
Outlines technician responsibilities for refrigerant handling and compliance with local regulations.
Manual and Unit Identification
Overview of Manual
Explains the manual's scope and advises referring to submittals for accurate installation details.
Nameplate Information
Details information found on the unit nameplate, crucial for ordering parts or service.
Pre-Installation Procedures
Site Preparation
Ensures the installation site can support the unit's weight and has adequate clearances.
Roof Curb Installation Checklist
Provides a checklist of critical steps for correctly installing the roof curb.
Installation Process
Unit Placement on Curb
Guides the correct placement of the unit on the roof curb, considering support and airflow.
Assembly and Installation Steps
Unit Roof Curb Assembly
Explains how to assemble the Trane-provided roof curb using splice plates and braces.
Pipe Cabinet and Specialty Curb Installation
Pipe Cabinet Roof Curb Installation
Provides instructions and dimensions for joining unit and pipe cabinet roof curbs for water management.
Specialty Roof Curbs
Offers specific instructions for units mounted on roof curbs not supplied by Trane.
Ductwork Recommendations
Sound Attenuation
Discusses methods and considerations for reducing noise generated by fans and ductwork.
Need help?
Do you have a question about the PSCA and is the answer not in the manual?
Questions and answers