Related Manuals for Atlas Copco HiLight V3+
Summarization of Contents
Safety Precautions
Description of Safety Symbols
Explains the meaning of various safety symbols used in the manual.
Safety Before Use
Crucial safety checks to perform before operating the light tower.
Safety During Use
Essential safety practices to follow while the light tower is in operation.
Engine Safety
Specific safety measures related to the engine's operation and potential hazards.
Leading Particulars
General Description of Light Towers
Overview of the HiLight V3+, V2+, and P2+ portable light towers and their capabilities.
HiLight V3+ and V2+ Components
Identifies key components of the HiLight V3+ and V2+ light towers with a diagram.
HiLight V3+ Diagram
Diagram labeling the main parts of the HiLight V3+ light tower.
HiLight V2+ Diagram
Diagram labeling the main parts of the HiLight V2+ light tower.
HiLight P2+ Overview
HiLight P2+ Diagram
Diagram labeling the main parts of the HiLight P2+ light tower.
HiLight P2+ LED Lamp
HiLight P2+ Lamp Diagram
Diagram showing the lamp assembly for the HiLight P2+ model.
Markings and Information Labels
Safety and Operation Labels
Visual guide to various labels indicating safety warnings, operational instructions, and component functions.
Product Drawings
General Arrangement Drawings
Detailed drawings showing the overall layout and components of the HiLight V3+ model.
HiLight V3+ Dimensional Drawings
Dimensional drawings for the HiLight V3+ light tower, including overall dimensions and lifting eye.
Circuit Diagrams
Lamp Circuit Wiring Schematic
Detailed schematic diagram for the lamp circuit, applicable for specific models and voltage.
Generator-Capacitor Excitation Schematic
Generator Component References
List of components within the generator excitation system and their reference numbers.
Wire Colour Codes
Key for wire colors used in the wiring diagrams, aiding in identification and connection.
Trailer Wiring Diagram
Trailer Wiring References
References for trailer wiring components and their descriptions.
Trailer Wire Colour Codes
Color codes for wires used in the trailer wiring diagram.
Engine Circuit Wiring Schematic
CE Wiring Legend
Legend for wiring specifications applicable to CE certified cubicles.
CSA Wiring Legend
Legend for wiring specifications applicable to CSA certified cubicles.
Deployment and Operation
Selecting a Location
Guidelines for choosing an optimal and safe location for operating the light tower.
Lifting Procedures
Instructions and safety precautions for lifting the light tower unit.
Lifting HiLight V3+ and V2+
Procedure for lifting the HiLight V3+ and V2+ light towers using the lifting eye.
Lifting HiLight P2+
Procedure for lifting the HiLight P2+ light tower, including folding support legs.
Towing Procedures
Before Towing
Checks and preparations required before towing the light tower.
During Towing
Guidelines and restrictions for safely towing the light tower.
After Towing
Steps to take after the light tower has been towed to its destination.
Deployment of HiLight P2+
Setting up HiLight P2+
Step-by-step guide for setting up the HiLight P2+ light tower from its carry-case.
Operation
Starting the Engine (V3+/V2+)
Step-by-step guide for starting the engine on HiLight V3+ and V2+ models.
Before Starting the Engine
Pre-start checks and safety instructions for the engine.
Starting the Engine
Procedure for starting the engine using the ignition key.
Stopping the Engine
Procedure for safely shutting down the engine.
Automatic Engine Shutdown
Explanation of the engine's auto-shutdown system for protection.
Starting the HiLight P2+
Raising the Mast (Winch Operation)
Details on using the winch to raise the lamp to the desired height.
Adjusting Lamp Direction (HiLight V3+)
Procedure for adjusting the direction of illumination for the HiLight V3+ lamps.
Raising and Lowering the Light Towers
Raising the Mast
Steps for raising the light tower mast safely.
Lowering the Mast
Energizing LED Lamps (V3+/V2+)
Steps to energize the LED lamps for HiLight V3+ and V2+ models.
Energizing LED Lamp (HiLight V2+)
Procedure to energize the LED lamp for the HiLight V2+ model.
Connecting to Main Power Supply
Instructions for connecting the light tower to the main power supply.
Maintenance
Regular Inspection
Routine checks and inspections to ensure the light tower is in good working order.
Replacing the Lamp
Procedure for replacing the LED lamps on the light tower.
Replacing the Lamp (HiLight V3+)
Detailed steps for replacing the LED lamp assembly on the HiLight V3+ model.
Technical Specifications
Reference Conditions
Standard conditions under which technical specifications are measured.
Operational Limitations
Defines the operating limits and conditions for the light tower.
Need help?
Do you have a question about the HiLight V3+ and is the answer not in the manual?
Questions and answers