Headers & Jumpers - Albatron PX865PEC PRO(2.0) User Manual

Headers & Jumpers
Front USB Headers: JUSB2/ JUSB3
This mainboard provides 4 USB ports and 2 USB headers on the mainboard which allowing you to
use 4 additional USB ports. An optional USB bracket may be included with this product. The bracket
is typical secured to the back side of your computer case and has standard USB ports that you can
connect to external USB devices. The bracket will also have cables that you can extend to the JUSB2
or JUSB3 headers.
USB Power
If you are using a USB 2.0 device with Windows® 2000/XP, you will need to install
the USB 2.0 driver from the Microsoft® website. If you are using Service pack 1 (or
later) for Windows® XP, and using Service pack4 (or later) for Windows® 2000,
you will not have to install the driver.
JKB_USBV1/2/3_4
The USB power souce headers are included the JKB_USBV1, JKB_USBV2, and JKB_USBV3_4.
These headers will allow you to set your USB power source at +5V. You will need to
w hen using a USB hard drive dsk.
14
Source Headers:
set to +5V