Lower the memory module into the socket and press firmly using both thumbs until the module snaps
in
to place.
R
epeat step 1, 2 & 3 for the remaining memory modules setting.
* The pictures shown above are for reference only. Your
mainboard configuration may vary with the pictures shown.
Back Panel Configuration
PS/2 Mouse & Keyboard Connectors: JKBMS1
This mainboard provides a standa
assign
ments are described
PS/2 Mouse
PS/2 Keyboard
Serial and Parallel Interface Ports
The mainboard is equipped with one serial port and one parallel
the back panel. These interface ports will be explained as
port on
b
elow.
rd PS/2 mouse connector and PS/2 Keyboard connector. The pin
below:
Pin
Assignment
1
Data
2
No connect
3
Ground
9
Pin
Assignment
4
+5 V (fused)
5
Clock
6
No connect