Table of Contents
Advertisement
Installation instructions
Zip HydroTap G4
®
Filtered boiling and chilled drinking water for industrial kitchens and tea rooms.
VENTILATION IS
ESSENTIAL
Affix model number label
!
here
802742UK
READ
SECTION 2 'VENTILATION'
READ BEFORE YOU START
802742UK - G4 IS IT industrial installation instructions - Jan. 2016 - V2.03
Page 1 of 32
Advertisement
Table of Contents
Related Manuals for Zip G4 Command-Centre
Summarization of Contents
Section 1 Tap installation
1.1 Generic requirements
Special tools and general requirements for tap installation.
1.2 Industrial Side Touch Tap Installation
Details for installing side touch HydroTap models.
1.3 Industrial Top Touch Tap Installation
Details for installing top touch HydroTap models.
Section 2 Ventilation
Preferred Ventilation Arrangement
Diagram and instructions for preferred ventilation setup.
Alternative Arrangement (Dual Fan Kit)
Describes dual fan kit ventilation for specific situations.
Alternative Arrangement (Vent Tray)
Describes vent tray ventilation for wider cupboards.
Section 3 Booster System
3.1 Product Description
Overview of the booster system's function and specifications.
3.2 Installation Procedure
Site requirements for installing the booster unit.
3.3 Booster Installation
Step-by-step guide for mounting the booster unit.
3.4 Braided Hose Connections
Instructions for connecting braided hoses to the booster.
3.5 Mounting the Filter Head
Steps for mounting the filter head bracket and attaching hoses.
3.6 Cartridge Installation and Flush
Process for installing and flushing the filter cartridge.
Section 4 Command-Centre™ Installation
4.1 External Bypass Valve
Explains the diverter bypass valve and its settings.
4.2 Braided Hose Fitting
Instructions for fitting braided water hoses to the Command-Centre™.
4.3 USB Connection
Guide for connecting the tap's USB cable to the Command-Centre™.
4.4 Connecting the Water Supply
Steps for connecting the water supply to the Command-Centre™.
4.5 HydroTap®G4 Industrial Models
Diagram and notes on connecting industrial HydroTap models.
Section 5 Commissioning
5.1 Select the Language
Steps for selecting the display language during initial setup.
5.2 Filter Flush
Procedure for flushing the water filter after installation.
5.3 Flow Calibration
Process for calibrating the water flow rate of the system.
5.4 Boiling Calibration
Procedure for calibrating the boiling water temperature.
5.5 Enable Booster
Steps to enable the booster if installed.
5.6 Legacy Mode
Instructions for enabling legacy mode for tap compatibility.
Need help?
Do you have a question about the G4 Command-Centre and is the answer not in the manual?
Questions and answers