Related Manuals for JUMO ecoTRANS Lf 02
Summarization of Contents
Identifying the device version
Type Designation
Details the type designation of the JUMO ecoTRANS Lf 01/02 device.
Commissioning
6.1 Fundamentals of conductivity measurement
Explains the principle of electrolytic conductivity measurement and cell constants.
6.2 Applying the supply voltage
Describes how to apply the supply voltage and interpret the LED status.
6.3 Altering the device functions
Covers changing device functions via setup program or teach-in connector.
6.3.1 Operation through the Setup
Details how to connect the device to a PC for configuration using setup software.
6.3.2 Operation through the teach-in connector
Explains how to set the switching point using the teach-in connector on the ecoTRANS Lf 02.
6.4 Calibration
Covers the process of calibrating the device.
6.4.1 Characteristics of sensor and medium
Window for entering sensor and medium characteristics like cell constant.
6.4.2 Preparing to calibrate the cell constant or temperature coefficient
Steps for connecting the device and starting the setup program for calibration.
6.4.3 Calibrating the cell constant
Procedure for calibrating the cell constant using the setup program.
6.4.4 Calibrating the temperature coefficient
Procedure for calibrating the temperature coefficient using the setup program.
6.5 Manual entry of temperature coefficient and cell constant
How to manually enter temperature coefficient and cell constant values.
6.6 Manual mode
Function for manually controlling analog output or relay.
6.7 Analog output (JUMO ecoTRANS Lf 01)
Details on setting up the analog output signal for the Lf 01 model.
6.8 Relay output (JUMO ecoTRANS Lf 02)
Details on setting up the relay output for the Lf 02 model.
6.9 LED messages
Explains the meaning of different LED indications and their corresponding device status.
Technical data
Analog input 1 (conductivity)
Specifies technical details for the conductivity input.
Analog input 2 (temperature)
Specifies technical details for the temperature input.
Measuring and control range
Details the available measuring and control ranges based on cell constants.
Conductivity deviation
Specifies deviation limits for conductivity measurements.
Reference temperature
Details the settable reference temperature for compensation.
Outputs
Lists specifications for analog and relay outputs.
7.1 General characteristics
Overview of general technical specifications.
A/D converter
Technical details of the Analog-to-Digital converter.
Sampling time
Specifies the sampling time for measurements.
Ambient temperature drift
Details the impact of ambient temperature on the device.
Measuring circuit monitoring
Describes the monitoring functions for the measuring circuits.
Data backup
Information about data backup mechanisms (EEPROM).
Supply voltage
Specifications for the device's supply voltage.
Electrical connection
Details on the electrical connection terminals.
Permissible ambient temperature
Specifies the allowable ambient temperature range.
Permissible storage temperature
Specifies the allowable storage temperature range.
Climatic conditions
Details environmental conditions like humidity.
Enclosure protection
Specifies the IP rating for enclosure protection.
Electrical safety
Information on electrical safety standards and classifications.
Electromagnetic compatibility
Details on EMC standards and requirements.
Housing
Description of the housing material and type.
Mounting
Information on how the device should be mounted.
Operating position
Specifies the allowed operating positions.
Weight
The approximate weight of the device.
Need help?
Do you have a question about the ecoTRANS Lf 02 and is the answer not in the manual?
Questions and answers