Step 1: Prepare For Installation; Tools You Need; Setup Information You Need - HP P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade Installation Manual

Chapter 1

Step 1: Prepare for Installation

Gather the tools and the setup information you need to install the drive, before
removing the drive from its packaging.

Tools You Need

To install the disk drive, you need the following tools:
Tweezers, needle-nose pliers or a similar tool for setting configuration
jumpers.
TM
A Torx T-15 screwdriver or a regular blade screwdriver.

Setup Information You Need

Before you begin, you need the following setup information:
The HP Operations and Maintenance Guide for your system or
Information Assistant on the HP Server Navigator CD-ROM.
The SCSI addresses available in your system. (Refer to your system in
Information Assistant on the HP Server Navigator CD-ROM for
information on determining available SCSI addresses.)
2
Prepare Drive for Installation