Step 2: Connect The Drive Activity Light - HP P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade Installation Manual

Chapter 2
Consult Information Assistant on the HP Server Navigator CD-ROM for your
system for additional information regarding the tray or bracket.
Attach a tray to a drive or change a factory-supplied tray (if needed) as follows:
Place the drive on a flat surface, free of static electricity, with the circuit
board of the drive facing up.
If your drive is on a tray that is not appropriate for your server, remove the
four screws attaching the drive to the tray and remove the tray. These
screws can be used to mount the drive on the new tray or bracket.
Place the new tray or bracket on the drive.
Align the mounting holes on the tray or bracket with those on the drive.
Attach the tray or bracket to the drive using the four screws.
Attach the drive rails to the T series drive tray.

Step 2: Connect the Drive Activity Light

The mounting tray (D2198B) has a drive activity light on the front-panel. The
drive activity light flashes during data access and the drive power-on self-test.
Connect the drive activity light for your drive as shown in Figures 2-2 to 2-7.
18
Mount the Drive in the Server L or T Series