l
Specify a name and click Next.
m
Continue through the Wizard clicking Finish when complete.
Printer driver already installed
If you have already installed the printer driver and wish to configure it for network printing, follow these steps:
®
a
For Windows Vista
Click the Start button, Control Panel, Hardware and Sound, and then Printers.
®
For Windows
XP and Windows Server
Click the Start button and select Printers and Faxes.
®
For Windows
2000:
Click the Start button and select Settings and then Printers.
b
Right click on the printer driver you wish to configure, and then select Properties.
c
Click the Ports tab and click Add Port.
d
Select the port that you wish to use. Typically this would be Standard TCP/IP Port. Then click the
New Port... button.
e
The Standard TCP/IP Port Wizard will start.
f
Enter the IP address of your network printer. Click Next.
g
Click Finish.
h
Close Printer Ports and Properties dialog box.
Other sources of information
How to configure the IP address of the printer, see Configuring your printer for a network on page 8.
:
®
2003:
Network printing from Windows
®
: basic TCP/IP Peer-to-Peer printing
8
8
8
93