Using Other Methods To Configure Your Printer For A Network - Brother HL-2170W Network User's Manual

c
Double-click the unconfigured device.
®
Windows
Note
• If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the
device will appear as Unconfigured in the BRAdmin Light utility screen.
• You can find the node name and Ethernet address by printing out the Printer Settings Page. See Printing
the Printer Settings Page on page 100.
d
Choose STATIC from Boot Method. Enter the IP Address, Subnet Mask and Gateway (if needed) of
your print server.
®
Windows
e
Click OK.
f
With the correctly programmed IP address, you will see the Brother print server in the device list.

Using other methods to configure your printer for a network

You can configure your network printer using other methods. See Other ways to set the IP address (for
advanced users and administrators) on page 120.
Configuring your printer for a network
®
Macintosh
®
Macintosh
2
2
11