Insufficient Paper For Job; No Sheets - Canon 2161B002 User Manual

Insufcient paper for job
The printer has received a print job longer than the
amount of roll paper left.
* When using the Media Take-up Unit, either hold down the Stop button for a second or more to cancel
printing or press the Online button to continue printing. However, if you continue printing, the roll paper
may run out during the print job and you may not be able to print all of the document.

No sheets.

A sheet has not been loaded.
Or, paper was removed during feeding.
Cause
Cause
Corrective Action
Follow the steps below to replace the roll.
1.
Press the Load/Eject button and remove the roll.
(→P.186)
(→P.181)
2.
Load a roll with enough paper left.
(→P.179)
(→P.182)
3.
If no barcode was printed on the roll, specify the
paper type.
(→P.188)
4.
Specify the paper length, unless a barcode has
been printed on the roll and you have deactivated
the automatic detection function of the remaining
roll paper.
(→P.189)
Hold down the Stop button for a second or more to
cancel printing.
Press the Online button to resume printing.
However, the roll paper may run out during the
print job and you may not be able to print all of the
document.
Corrective Action
Load paper of the type and size you have specied
in the printer driver.
(→P.212)
Hold down the Stop button for a second or more to
cancel printing.
Messages regarding paper
Error Message 767