4.
Using both hands, rotate the Roll Holder in the direction of the arrow to rewind the roll.
5.
Remove the Roll Holder from the Roll Holder Slot.
6.
Lower the Ejection Guide and close the Top Cover.
Important
•
If the Platen inside the Top Cover becomes dirty, it may soil the underside of paper. Clean the Platen
after borderless printing or printing on small paper.
•
Setting CarriageScanWdth to Fixed on the Control Panel may reduce soiling on the underside of
the paper. However, this requires more time for printing.
Handling rolls
Handling Paper 187