Table of Contents
Advertisement
9.
Remove the Rewind Spool from the Media Take-up Unit.
Important
•
Always turn off the Media Take-up Unit before removing the Rewind Spool. The Media Take-up Unit
may be damaged if you do not turn it off rst.
•
Remove the Rewind Spool, pulling off both ends from the Media Take-up Unit at once.
10.
Unlock the ange on the left side of the Rewind Spool by lifting the lever (a) from the shaft
side. Remove the ange.
11.
Remove the entire paper core with the rewound printed documents from the Rewind Spool.
Note
•
You can leave the Rewind Spool on the Media Take-up Unit even when it is not used for rewinding
rolls.
Media take-up unit
Handling Paper 241
Advertisement
Table of Contents
