Cannot Print Over A Netware Network - Canon 2161B002 User Manual

Cannot print over a network

Cannot print over a NetWare network

The printer's NetWare settings are not congured
correctly.
The computer you are trying to print from is not
congured correctly.
The NetWare server and services are not congured
correctly.
736 Troubleshooting
Cause Corrective Action
Make sure the printer's NetWare settings are
congured correctly. In particular, make sure a valid
frame type is selected. For details, see "Conguring
the Printer's NetWare Network Settings". (→P.624)
Make sure the computer's NetWare settings are
congured correctly. For details, see "Conguring
NetWare Network Settings". (→P.633)
Check the following points.
1.
Make sure the NetWare le server is running.
2.
Make sure there is enough free disk space on the
NetWare le server. Insufcient disk space may
prevent you from processing large print jobs.
3.
Start NWADMIN or PCONSOLE and conrm that
the print service is congured correctly and the
print queue is available.
4.
If data transmission to a printer on another subnet
fails, deactivate NCP burst mode in that printer's
network protocol settings.
5.
If the printer is used in queue server mode, specify
"Other/Unknown" as the printer type.