Table of Contents
Advertisement
Other problems
Other problems
The printer consumes a lot of ink
Many full-page color images are printed.
Head Cleaning B is used often.
You have just nished initial installation, when more
ink is consumed to ll the system.
A message to check the Maintenance Cartridge is not
cleared after you replace the Maintenance Cartridge
The printer has not detected the new Maintenance
Cartridge .
Paper is not cut neatly
The paper is bent or curled at the cut position.
Paper rises by the ends of the cut position before
it is cut.
The Cutter Unit is installed incorrectly.
The blade of the Cutter Unit is dull.
756 Troubleshooting
Cause
Cause
Cause
Corrective Action
In print jobs such as photos, images are lled with
color. This consumes a lot of ink. This does not
indicate a problem with the printer.
Head Cleaning B consumes a lot of ink. This does
not indicate a problem with the printer. Unless the
printer has been moved or stored for a long period
or you are troubleshooting Printhead problems, we
recommend not performing Head Cleaning B , to
the extent possible.
After initial installation or at the rst-time use after
transfer, ink ows into the system between the Ink
Tank and Printhead , which may cause the ink level
indicators to drop to 80%. This does not indicate a
problem with the printer.
Corrective Action
Remove the new Maintenance Cartridge you have
just installed and insert it again rmly.
Restart the printer.
Corrective Action
Straighten out any curling by the edges of the paper.
Reload the paper correctly.
Install the Cutter Unit correctly. (→P.702)
Replace the Cutter Unit . (→P.702)
Advertisement
Table of Contents
