Brother GT-782 Instruction Manual page 116

7. Troubleshooting
Error
Message
code
2101 Not Enough Area
2102 Card Access Error
PC Comm. Error
3000
Send data again
3001 -
3002 PC Data Error
3003 PC Data Error
3004 PC Data Error
3005 PC Data Error
3006 Received NG Data
3007 PC Data Error
3008 PC Data Error
3009 PC Data Error
3010 PC Data Error
3011 PC Data Error
3012 PC Data Error
4000 PC Data Error
4001 PC Data Error
4002 PC Data Error
4003 PC Data Error
107
Meaning
The Compact Flash does not have
enough area for storing logs.
Failure in file reading / writing
GT-782 failed to receive the print data
(time out).
This error occurs when the USB cable
is disconnected during data
transmission, or data transmission is
canceled on the PC.
The PC will not receive the data sent
from GT-782 (transmission buffer
overflow).
GT-782 received the data that is not
supported.
No compatibility of communication
command between the PC driver and
the GT-782 firmware.
The versions of he PC driver and the
GT-782 firmware do not correspond.
The Check Sums of the received
program data did not correspond when
updating the firmware.
The Check Sums of the received data
did not correspond when updating
EEPROM.
GT-782 received the data that is not
supported, or the data transmission
from the PC to GT-782 is interrupted in
an inappropriate way.
The data transmission might be made
from the PC to GT-782 by using a
printer driver not for GT-782.
GT-782 received a job in which
commands are arranged improperly.
The Check Sums of the received
commands did not correspond.
GT-782 received a command that is
not supported.
A maintenance command is mixed in
normal jobs.
Non-command data is mixed.
The Check Sums of the received jobs
did not correspond.
GT-782 received the data that is not
supported from the PC.
Check the free space of the Compact Flash with PC.
Insert a Compact Flash with free area available.
Push OK Button to escape menu and re-enter Compact Flash.
Or see " 7-1. Solving Printer Problems".
Check the connection between the PC and GT-782, and send
print data again. If it has no effect, reboot both the PC and
GT-782.
**
Check the connection between the PC and GT-782, and send
print data again. Or reboot both the PC and GT-782.
Contact your dealer or Brother .
Reboot and update GT-782 again.
Contact your dealer or Brother .
Check the printer setting of the PC.
Check the connection between the PC and GT-782 and send
print data again.
Reboot GT-782 and send print data again.
Contact your dealer or Brother
These errors might happen when GT-782 malfunctions by
environmental reasons. If the error does not show, the printer is
available.
Reboot GT-782 and send print data again.
Contact your dealer or Brother .
These errors might happen when GT-782 malfunctions by
environmental reasons. If the error does not show, the printer is
available.
GT-782
Solution