Error Messages - Brother GT-782 Instruction Manual

7. Troubleshooting
７ -４ . Error Messages
Here is a complete list of error messages that GT-782 shows. The "L" on the Display means error(s) in the left and "R" means
error(s) in the right. When mark ** is in Solution, write down the error code number and the message, and then make
contact to your dealer or Brother. Error codes of Warnings (#1xxx) are only written in Log file.
Error
Message
code
1000 (INK LOW Black)
1000 (INK LOW White-1)
1001 (INK LOW Magenta)
1001 (INK LOW White-2)
1002 (INK LOW Cyan)
1002 (INK LOW White-3)
1003 (INK LOW Yellow)
1003 (INK LOW White-4)
1021 Wp-Blade Life
1051 CR Motor Life
1060 Temp Low: xxx °F
1061 Temp High: xxx °F
1070 Battery Life
1080 RTC not Adjusted
1090 Caps/Wiper Clean
1111 Clean Tube W1
1112 Clean Tube W2
1113 Clean Tube W3
1114 Clean Tube W4
2000 NO INK Black
2000 NO INK White-1
2001 NO INK Magenta
2001 NO INK White-2
2002 NO INK Cyan
2002 NO INK White-3
2003 NO INK Yellow
105
Meaning
Black ink level is too low.
White 1 ink level is too low.
Magenta ink level is too low.
White 2 ink level is too low.
Cyan ink level is too low.
White 3 ink level is too low.
Yellow ink level is too low.
White 4 ink level is too low.
The Print Head Wiper Blade needs to
be replaced.
The Carriage Motor is worn.
The ambient temperature is below the
range that maintains the print quality.
"xxx" is the current temperature.
The ambient temperature is above the
range that maintains the print quality.
"xxx" is the current temperature.
The battery ran out.
The internal clock has not been set.
Needs to clean Caps and Wiper
W1 needs to do Tube Cleaning.
W2 needs to do Tube Cleaning.
W3 needs to do Tube Cleaning.
W4 needs to do Tube Cleaning.
Black Ink Cartridge is not installed.
White 1 Ink Cartridge is not installed.
Magenta Ink Cartridge is not installed.
White 2 Ink Cartridge is not installed.
Cyan Ink Cartridge is not installed.
White 3 Ink Cartridge is not installed.
Yellow Ink Cartridge is not installed.
Prepare a new Black ink cartridge.
Prepare a new White ink cartridge.
Prepare a new Magenta ink cartridge.
Prepare a new White ink cartridge.
Prepare a new Cyan ink cartridge.
Prepare a new White ink cartridge.
Prepare a new Yellow ink cartridge.
Prepare a new White ink cartridge.
See "7-2-9. Replacing the Wiper Blade" and replace to a new
one.
**
Raise the room temperature.
Drop the room temperature.
**
**
Clean the Print Head Caps and Wiper.
Execute Tube Cleaning W1.
Execute Tube Cleaning W2.
Execute Tube Cleaning W3.
Execute Tube Cleaning W4.
Install a Black Ink Cartridge.
Install a White Ink Cartridge.
Install a Magenta Ink Cartridge.
Install a White Ink Cartridge.
Install a Cyan Ink Cartridge.
Install a White Ink Cartridge.
Install a Yellow Ink Cartridge.
GT-782
Solution