Brother GT-782 Instruction Manual page 121

Error
Message
code
6102 Fail: CRG STOP 1
6103 Fail: CRG STOP 2
6104 Fail: CRG STP PRT
6105 Fail: CRG STP FLS
6110 Fail: BY EEP WRT
6111 Fail: BY FLSH ERS
6112 Fail: BY FLSH WRT
6113 Fail: BY FLSH CHK
6114 Fail: BY RAM Test
6120 Fail: Head Temp K
6121 Fail: Head Temp M
6122 Fail: Head Temp C
6123 Fail: Head Temp Y
6134 Fail: Head VLTG
6150 Fail: Sur Temp
6200 Fail: MNT Cap Drv
6210 Fail: MNT Pump Drv
6220 Fail: MNT Wipe Drv
6230 Fail: MNT INK-PCBA
6240 Fail: MNT INK-PCB
PRG: SH SCER
1508
PRG: SH SCER
1757
7000
PRG: SH SCER
1788
PRG: SH SCER
XXXX
7001 PRG: SH Exception
7002 PRG: SH ILGL TMR
7010 PRG: SH ILGL Arg
7011 PRG: SH ILGL RTN
Meaning
Failure in stopping the Carriage at the
proper position
Failure in stopping the Carriage at the
proper position (ASIC error)
CR time-out of the Carriage during
printing
CR time-out of the Carriage during
flashing
Failure in writing to EEPROM of BY
Failure in clearing FLASH ROM of BY
Failure in writing to FLASH ROM of BY
Defect in FLASH ROM Check Sum of
BY
Defect in RAM check of BY
Print Head temperature defect (K or
W1)
Print Head temperature defect (M or
W2)
Print Head temperature defect (C or
W3)
Print Head temperature defect (Y or
W4)
Print Head voltage defect
Ambient temperature sensor defect
The operation stopped because the
Cap Driver has overheated.
The operation stopped because the
Pump Driver has overheated.
The operation stopped because the
Wipe Driver has overheated.
The Maintenance Unit failed to
communicate with the Ink Sensor A
PCB.
The Maintenance Unit failed to
communicate with either Ink Sensor A
or Ink Sensor B PCB.
Carriage initialization failed.
Reading EEPROM Timeout (BY)
Writing EEPROM Timeout (BY)
Communication timeout (SH to BY)
Error inside the program
(Exceptionally occurs in CPU of SH)
Error inside the program
(Incorrect timer setting of SH)
Error inside the program
(Argument defect of SH)
Error inside the program
(Returning value defect of SH)
Check whether the media is jamming in the Carriage.
Clean the Carriage by referring to "7-2-9. Cleaning the Carriage
Shafts". If the cleaning has no effect, contact your dealer or
Brother .
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
GT-782
7. Troubleshooting
Solution
112