Menu List - Brother GT-782 Instruction Manual

Garment printer
Hide thumbs Also See for GT-782:
Table of Contents

Advertisement

2. Identifying Your Printer's Parts

2-6-3. Menu List

There are some differences in Left/Right menu. White Ink menus are in the right and CompactFlash and general menus are in
the left control panels
Left Menu
Head Cleaning
Test Print
Card Data Load
Print Direction
Maintenance
Total Print
Speaker Volume
LCD Contrast
Whole Update
Auto Power-Off
Platen Reset
Language
Temperature
Auto Job Delete
Version
13
Content
Executes Head Cleaning by one or all four Print Heads.
Refer to "7-2-2. Cleaning the Print Heads"
Normal: normal mis-firing
Powerful:After cleaning the Print Head nozzles, when normal head cleaning does not work.
Prints to check mis-firing and print quality.
Nozzle Check: shows mis-firing
Standard Check: shows general print quality
Reads print data (ARP file) in CompactFlash. The inside folder shows with [...].
Sets the print direction. This setting is prior to Printer Driver setting.
Auto: Default bi-directional, Printer Driver setting is available.
Always Uni- : always prints uni-directionally.
Always Bi- : always prints bi-directionally.
Refer to "7-2-4. Changing the Print Direction".
Goes into the maintenance submenu.
Cap/Wiper Clean: "6-1-2. Replacing the Wiper Cleaner"
Nozzle Cleaning: "7-2-6. Cleaning the Print Head Nozzles"
Head Replacement: "7-2-7. Replacing the Print Head"
Auto Cleaning:"7-2-5. Changing the Auto Head Cleaning Setting"
Initial Cleaning: Loads ink into the tube and Print Heads.
Tube Cleaning: 3-time Initial Cleaning to flush the whole tube and Print Heads. (CMYK)
CR Speed Adjust: Adjusts the increase/decrease of the Carriage speed.
Extra Wipe Set: "7-2-10. Setting Extra Wipe"
Shows the number of prints on the left Platen.
Adjusts the speaker volume.
Adjusts the Display contrast.
Updates the firmware.
Stops the controllers automatically and save the power after the set hour(s). Default is [0] (no
power off). Turn ON the printer for re-start.
Restores the left Platen.
Sets the language shown on the display.
Sets Fahrenheit / Centigrade
Delete the print data automatically after the print number which is set with Printer Driver is
finished. Default is OFF.
Shows versions.
GT-782

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents