Brother GT-782 Instruction Manual page 120

7. Troubleshooting
Error
Message
code
5218 MNT RSP Error: XX
5219 MNT ILGL VERSION
5220 Error: RSP10
5221 MNT RSP Error: XX
5222 MNT RSP Error: XX
5300 SHSH:INIT TIMEOUT
6000 Fail: PLTN Load
6001 Fail: PLTN Unload
6002 Fail: PLTN LF
6003 Fail: PLTN Put in
6004 Fail: CLRNS SNSR
6010 Fail: SH EEP WRT
6011 Fail: SH FLSH ERS
6012 Fail: SH FLSH WRT
6013 Fail: SH FLSH CHK
6014 Fail: SH RAM Test
6020 Fail: RTC Read
6021 Fail: No Battery.
6031 Fail: Panel Button
6032 Fail: Panel Button
6033 Fail: Panel Button
6034 Fail: Panel Button
6035 Fail: Panel Button
6036 Fail: Panel Button
6037 Fail: Panel Button
6038 Fail: Panel Button
6100 Fail: CRG Speed
6101 Fail: CRG Move
111
Meaning
An overrun, framing error or parity error
has occurred.
The Maintenance version is too old.
Received an error response from the
Maintenance Unit while measuring
negative pressure.
Received an error response from the
Maintenance Unit while updating the
firmware.
Received an error response from the
Maintenance Unit while re-initializing
after inserting the Wiper Cleaner
Cassette.
Timeout of the other SH in initialization
failure
Platen loading error
Platen unloading error
Platen moving error
Platen moving error
Clearance sensor error
Failure in writing to EEPROM of SH
Failure in clearing FLASH ROM of SH
Failure in writing to FLASH ROM of SH
Defect in FLASH ROM Check Sum of
SH.
Defect in RAM check of SH
Defect in the real time clock
Battery exhaustion of the real time
clock
Platen Button may be malfunctioning.
Print Button may be malfunctioning.
The Stop Button may be
malfunctioning.
The Back Button may be
malfunctioning.
The OK Button may be malfunctioning.
The Down Button may be
malfunctioning.
The Up Button may be malfunctioning.
The Head Cleaning Button may be
malfunctioning.
Defect in the Carriage load (in the high
level).
An error occurred while moving the
Carriage.
**
**
**
**
**
**
**
**
**
**
Check whether something is placed on the Control Panel.
Contact your dealer or Brother .
Clean the Carriage by referring to "7-2-9. Cleaning the Carriage
shafts". If the cleaning has no effect, contact your dealer or
Brother .
**
GT-782
Solution