Brother GT-782 Instruction Manual page 108

7. Troubleshooting
(4) Press the Up/Down Button to select the "Cap/Wiper Clean", and then press the OK Button.
The following message appears.
(5) Turn off your printer.
(6) Open the Front Cover with both hands after unlocking the cover locks and slide the Latch to fix the Front Cover.
(7) Pull out the Wiper Cleaner Cassette.
<Note>
Do not tilt the Wiper Cleaner Cassette; ink may get on your hands or clothing.
Do not touch the Clearance Sensor (the bar above the Wiper Cleaner Cassette); it may cause a malfunction.
(8) Open the Wiper Replacing Kit and put on the gloves.
99 GT-782
4325M
(Continued on the next page)